From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] hcitool returns error 0x11 with RSSI command From: Marcel Holtmann To: Alvin Lam Cc: BlueZ Mailing List In-Reply-To: <40616653.3000904@shaw.ca> References: <20040323223102.25A8F1D0425@sc8-sf-uberspam1.sourceforge.net> <40616653.3000904@shaw.ca> Content-Type: text/plain Message-Id: <1080129697.2515.103.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 24 Mar 2004 13:01:38 +0100 Hi Alvin, > I am using BlueZ with two Socket CompactFlash BT card using the dtl1_cs > driver. I run "sdptool browse &" and when a connection is established I > then run "hcitool ". This yields the > following errors: > > HCI get_link_quality cmd failed (0x11) > Read RSSI returned (error) status 0x11 > HCI read_transmit_power_level cmd failed (0x11) > > Since 0x11 is 17 in decimal, looking at errno.h shows that this error > corresponds to "File Exists". I found several previous messages on the > mailing list referring to a similar error, but a different return value > (0x01). > > I am thinking perhaps the Socket CF card does not support these > features? Any ideas what in particular is failing in hci_send_req()? the socket card don't support these features. Check your card features with this command "hciconfig hci0 features". Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users