From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] PAND and RFCOMM simultaneously From: Marcel Holtmann To: Harald Meier Cc: BlueZ Mailing List In-Reply-To: <004501c417b0$76df38c0$4000fe0a@rtsviec64> References: <003201c4161f$d37a2050$4000fe0a@rtsviec64> <1080630888.4094.5.camel@pegasus> <004501c417b0$76df38c0$4000fe0a@rtsviec64> Content-Type: text/plain Message-Id: <1080803375.2565.7.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 01 Apr 2004 09:09:36 +0200 Hi Harald, > the output of hciconfig -a is: > hci0: Type: PCIBD Address: 00:02:78:02:2E:C3 ACL MTU: 192:8 SCO MTU: > 64:8 > UP RUNNING PSCAN ISCAN > RX bytes:70 acl:0 sco:0 events:7 errors:0 > TX bytes:34 acl:0 sco:0 commands:7 errors:0 > Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: > Link mode: SLAVE ACCEPT > Name: 'ka0009 (0)' > Class: 0x000000 > Service Classes: Unspecified > Device Class: Miscellaneous, > HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver: > 0x175 > Manufacturer: Cambridge Silicon Radio (10) > > Sorry for the last unformatted output, I pressed accidentally the send > button. I thought I already answered this, but it seems that I didn't :( To run an inquiry while you already have an ACL link open, you need at least the HCI 16.4 firmware on your Bluetooth chip. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users