From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] Bluez and D-Link DBT-120 From: Marcel Holtmann To: Max Cc: BlueZ Mailing List In-Reply-To: <20040403190647.GA16596@venus> References: <20040403190647.GA16596@venus> Content-Type: text/plain Message-Id: <1081073362.2839.29.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sun, 04 Apr 2004 12:09:23 +0200 Hi Max, > I have a D-Link DBT-120 (USB Bluetooth dongle) but can't get it to work. > > The problem: > > root@venus:~# lsusb > Bus 004 Device 008: ID 0a12:0001 Cambridge Silicon Radio Ltd. > > > root@venus:~# bluefw 004/008 > > root@venus:~# hciconfig > hci0: Type: USB > BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 > DOWN > RX bytes:0 acl:0 sco:0 events:0 errors:0 > TX bytes:0 acl:0 sco:0 commands:0 errors:0 > > root@venus:~# hciconfig hci0 up > Can't init device hci0. Input/output error(5) > > The last command (hciconfig hci0 up) produces an error in syslog: > > Apr 3 20:09:30 venus kernel: hci_usb_intr_rx_submit: hci0 intr rx submit failed urb d91c1954 err -28 > > I'm running kernel 2.6.4, the modules that I have loaded are bluetooth > and hci_usb. disable CONFIG_BT_HCIUSB_SCO in your kernel config. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users