From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] BlueZ error in cc,cc,dc sequence From: Marcel Holtmann To: cijoml@volny.cz Cc: BlueZ Mailing List In-Reply-To: <200404162339.01392.cijoml@volny.cz> References: <200404162339.01392.cijoml@volny.cz> Content-Type: text/plain Message-Id: <1082159344.4489.1.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sat, 17 Apr 2004 01:49:04 +0200 Hi Michal, > notas:/etc/hotplug# hcitool cc 00:0A:D9:FC:EC:51 > notas:/etc/hotplug# hcitool cc 00:0A:D9:FC:EC:51 > Can't create connection: Input/output error you can't have to ACL links to the same remote device. > notas:/etc/hotplug# hcitool cc 00:0A:D9:FC:EC:51 > Can't create connection: Input/output error > notas:/etc/hotplug# hcitool cc 00:0A:D9:FC:EC:51 > Can't create connection: Input/output error > notas:/etc/hotplug# hcitool dc 00:0A:D9:FC:EC:51 > Not connected. > notas:/etc/hotplug# hcitool dc 00:0A:D9:FC:EC:51 > Not connected. > notas:/etc/hotplug# hcitool cc 00:0A:D9:FC:EC:51 > Can't create connection: Input/output error > notas:/etc/hotplug# hcitool dc 00:0A:D9:FC:EC:51 > Not connected. > > But device is connected Check with "hcitool con" every time, because this is what the kernel sees and "hcitool dc" only sends the raw HCI_Disconnect command. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users