Re: [Bluez-users] Compile bluez-bluefw-1.0 fails

[Marcel Holtmann <marcel@holtmann.org>]

Hi Alex,

> > check the path for the firmware files in the firmware.agent script.
> > Is the script is executable? Is /sys mounted? What are the
> > permissions of your firmware files?
> 
> firmware.agent is executable. The firmware permissions are as follows:
> 
> -rw-r--r--    1 root     root       114688 Apr 19 12:29 BCM2033-FW.bin
> -rw-r--r--    1 root     root         3245 Apr 19 12:29 BCM2033-MD.hex
> 
> This should be okay, I'd imagine - no need to execute or write to them. 
> For the other questions, I've attached firmware.agent, but everything 
> looks correct to me.
> 
> > You need CONFIG_FW_LOADER, but this should be done automaticly by the
> > bcm203x driver and lsmod must show you a firmware_class module.
> 
> Yup, this seems to be working; lsmod has the following:
> 
> firmware_class          7616  1 bcm203x

so far so good. Everything seems to look fine, but actually the bcm203x
driver can't load the BCM2033-MD.hex firmware file from the userspace.
Add some debugging lines to firmware.agent to see if it got really
called by the hotplug system.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users