You might want to take a look at the hcid.conf man page in the CVS
version, which contains almost all the details you need in order to make
all this work,

Edouard

On Wed, 2004-04-21 at 10:08, franz keuner wrote:

> hi steve,
> 
> thanks for your quick answer. 
> that's the answer of my linux computer to hciconfig hci0 class
> 
> hci0:   Type: USB
>         BD Address: 00:00:00:00:00:00 ACL MTU: 192:8  SCO MTU: 64:8
>         Class: 0x000100
>         Service Classes: Unspecified
>         Device Class: Computer, Uncategorized
> 
> i don't know what i have to change exactly here...
> 
> i read the bluetooth assigned numbers document. would i have to enter 
> 
> hciconfig hci0 class 0x100104
> 
> to make the right changes class? (the 1st hex number representing obex file
> transfer and the rest represting a desktop computer)
> 
> and if that's right, is the pda in contrast to the phone ignoring this
> mistake because it's possible to receive businesscards from the pda?
> 
> regards,
> 
> franz
> 
> > Hi Franz,
> > Make sure you have the correct class-of-device setting on the Linux box.
> > (See hciconfig(8).) Phones and PDAs often don't even bother doing an SDP
> > search if the device-class obtained by device discovery doesn't contain
> > the correct hint bits.
> > 
> > Cheers,
> > Steve
> > 
> > On Tue, 2004-04-20 at 09:56, franz keuner wrote:
> > > hi marcel,
> > > 
> > > for quite a while i had no questions concerning bluez and my Sony
> > Ericsson
> > > P900 ;-)
> > > with your help i made a lot of progress.
> > > 
> > > now i'm trying to send and receive businesscards (version2.1) between
> > the
> > > linux computer with bluez and the mobile phone.
> > > 
> > > i installed the openobex package for suse 9.0 and the openobex
> > applications.
> > > 
> > > i can send a businesscard from the linux computer to the mobile phone
> > using
> > > the obextest tool from the applications package.
> > > 
> > > but if i try to receive a businesscard from the mobile phone on the
> > linux
> > > computer with the opd program the phone reports a failure trying to
> > transfer
> > > the businesscard to the linux computer.
> > > 
> > > but it works if i try to send the same businesscard from the phone to a
> > pda.
> > > the pda receives the businesscard correctly.
> > > 
> > > and if try to receive the businesscard from the pda on the linux
> > computer
> > > with the opd program this is also working.
> > > 
> > > i'm sure i'm listening on the right channels. maybe the problem is that
> > the
> > > phone can't communicate with the opd program waiting for a connection...
> > > 
> > > do you have any ideas or hints?
> > > 
> > > regards,
> > > 
> > > franz
> > > 
> > > hcidump shows the following trying to the send from the phone to the
> > linux
> > > computer:
> > > 
> > > hcidump r
> > > HCIDump - HCI packet analyzer ver 1.5
> > > device: hci0 snap_len: 1028 filter: 0xffffffff
> > > > HCI Event: Connect Request(0x04) plen 10
> > > < HCI Command: Accept Connection Request(0x01|0x0009) plen 7
> > > > HCI Event: Command Status(0x0f) plen 4
> > > > HCI Event: Connect Complete(0x03) plen 11
> > > < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
> > > > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7
> > > > HCI Event: Command Complete(0x0e) plen 6
> > > < HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4

-- 
Edouard Lafargue <ELafargue@montrouge.sns.slb.com>
Schlumberger