Re: [Bluez-users] Can't get di Nuovo works in BT :'( help please. (a bit long, sorry)

[Di Pietro Nicolas <potens@swing.be>]

Le sam 24/04/2004 =E0 14:29, Marcel Holtmann a =E9crit :=20
> Hi Nicolas,
>=20
> > At the moment, the keyboard works and the media pad also (without the
> > screen but
> > for now, I don't care), the multimedia key doesn't work (some a of them
> > but not
> > much) and the mouse doen't work at all.=20
>=20
> your report is totally messed up. Works, works not, done this, done
> that, this device is ok and that is not. I can only help you if you
> write in clear words what you are trying to do and what you've done so
> far. Do it step by step and actually you should start with getting
> hid2hci working reliable.
>=20
> Regards
>=20
> Marcel
Okay, I'm sorry if it's messed up.
What I've done :
-patched kernel2.6.5 against patch-2.6.5-mh3.gz
-I've looked if I've the multibyte support in hid, seems okay.
-compiled utils2 and libs2 from CVS

What works always :
the keyboard
the media pad in numpad mode

What works somtimes :
the mouse
the media pad in nav mode

What's the matter :
Generally, the mouse doesn't work, the media pad in nav mode not either.
I don't know why and when.
In this case, when I move the mouse up/down, it scroll or click.
If I move the mouse left/right, it move up/down and scroll
the media pad in nav mode move the cursor (but in a odd way)

if I try hid2hci (following the
http://www.bueche.ch/comp/mx900/feedback/ghisoli_alexandre_mx900_with_hub.t=
xt
 advices, I get=20
Switching device 046d:c704 to HCI mode failed (No such file or=20
directory)

In the other case (when the mouse work an the media pad also)
It seems that this case appear more frequently if there is no
batteries/cells in the mouse or media pad at boot-time.

hid2hci, give me :
Switching device 046d:c704 to HCI mode was successful
usb 3-1.2 : new full speed USB deviceusing address 4
Bluetooth : Core ver 2.4
hci_usb : Unknow symbol hci_free_dev
hci_usb : Unknow symbol hci_alloc_dev
hci_usb : Unknow symbol hci_unregister_dev
hci_usb : Unknow symbol hci_register_dev
NET : Registered protocol family 31
Bluetooth : HCI device and connection manager initialized
Bluetooth : HCI socket layer initialized
hci_usb : Unknow symbol hci_free_dev
hci_usb : Unknow symbol hci_alloc_dev
hci_usb : Unknow symbol hci_unregister_dev
hci_usb : Unknow symbol hci_register_dev
Bluetooth : HCI USB driverver 2.5
drivers/usb/core/usb.c : registered new driver hci_usb
and the hub is frozen.

>if you switch to HCI mode, you have to run the HID profile by yourself
before switching ?=20
Could you explain that ? (or just give me link)

Thanks a lot for your responses.
Nicolas




-------------------------------------------------------
This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek
For a limited time only, get FREE Ground shipping on all orders of $35
or more. Hurry up and shop folks, this offer expires April 30th!
http://www.thinkgeek.com/freeshipping/?cpg=12297
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users