From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] Make a local network using two Bluetooth USB Dongle From: Marcel Holtmann To: PC32 YPXin Cc: BlueZ Mailing List In-Reply-To: References: Content-Type: text/plain Message-Id: <1084100698.9269.19.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sun, 09 May 2004 13:04:58 +0200 Hi, > I have made a File Transfer using two Bluetooth USB Dongle(which is Bigabyte supporting Bluetooth Spec v1.1) between a linux box and windows machine. > In windows, I can find the BlueDevice in linux and its service(such as Audio Gateway, include File Transfer), but I cannot transfer to linux, because timeout. > > I do that as the document from bluez.org: > Get the kernel 2.4.20, and patch it. > then compile with support Bluetooth: > L2CAP > SCO links > RFCOMM > BNEP > Bluetooth device drivers: > HCI USB driver > HCI UART driver > HCI BlueFRITZ! USB driver > HCI VHCI driver > > make, make install,make modules,make modules_install > then reboot > install the bluetools from bluez.org > and ln /usr/sbin/hcid /sbin/hcid > /etc/init.d/bluetooth start > and get [OK]; > Then let windows to search the device, and found it, got its service, it was ok. Then transfer file, but failed. > This is log from hcidump: > > > HCI Event: Connect Request(0x04) plen 10 > < HCI Command: Accept Connection Request(0x01|0x0009) plen 7 > > HCI Event: Command Status(0x0f) plen 4 > > HCI Event: Connect Complete(0x03) plen 11 > < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 > > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 > > HCI Event: Command Complete(0x0e) plen 6 > < HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4 > > HCI Event: Max Slots Change(0x1b) plen 3 > > HCI Event: Command Status(0x0f) plen 4 > > HCI Event: Connection Packet Type Changed(0x1d) plen 5 > > ACL data: handle 0x0028 flags 0x02 dlen 12 > L2CAP(s): Connect req: psm 1 scid 0x0049 > > HCI Event: Disconn Complete(0x05) plen 4 > > > I don't know why the L2Cap(s): Connect req broken? to let others find your service information you need to run a SDP server. Try starting sdpd. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users