From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] bluez-utils 2.7 and bthid From: Robert Foster To: Marcel Holtmann Cc: BlueZ Mailing List In-Reply-To: <1084177906.9269.129.camel@pegasus> References: <1084160685.3287.2.camel@rover.mountainvisions.com.au> <1084177906.9269.129.camel@pegasus> Content-Type: text/plain Message-Id: <1084181491.3559.2.camel@rover.mountainvisions.com.au> Mime-Version: 1.0 Date: Mon, 10 May 2004 19:31:32 +1000 List-ID: Update: I received the PIN prompt... This time, before I tried to connect, I pushed the Connect Channel button on the bottom of the mouse: hcidump: < HCI Command: Create Connection(0x01|0x0005) plen 13 > HCI Event: Command Status(0x0f) plen 4 > HCI Event: Connect Complete(0x03) plen 11 < HCI Command: Create Connection(0x01|0x0005) plen 13 > HCI Event: Command Status(0x0f) plen 4 > HCI Event: Connect Complete(0x03) plen 11 < HCI Command: Create Connection(0x01|0x0005) plen 13 > HCI Event: Command Status(0x0f) plen 4 > HCI Event: Link Key Request(0x17) plen 6 < HCI Command: Link Key Request Negative Reply(0x01|0x000c) plen 6 > HCI Event: Command Complete(0x0e) plen 10 > HCI Event: PIN Code Request(0x16) plen 6 < HCI Command: PIN Code Request Negative Reply(0x01|0x000e) plen 6 > HCI Event: Command Complete(0x0e) plen 10 > HCI Event: Connect Complete(0x03) plen 11 system log: May 10 19:27:08 rover hcid[2098]: link_key_request (sba=00:20:E0:85:06:49, dba=00:50:F2:E5:B5:57) May 10 19:27:08 rover hcid[2098]: pin_code_request (sba=00:20:E0:85:06:49, dba=00:50:F2:E5:B5:57) May 10 19:27:13 rover bthid[3374]: Connection failed: Invalid exchange (52) Rob. On Mon, 2004-05-10 at 18:31, Marcel Holtmann wrote: > Hi Robert, > > > bthid does not seem to play nicely with the recently released > > bluez-utils 2.7. Every time I tried to connect to my MS mouse, it would > > ask for a pin code. I had to uninstall bluez-{utils|libs} 2.7 and > > revert back to the 2.6 release before this problem would go away again. > > I haven't seen such problem. Do you enabled auth or encrypt in your > hcid.conf? Look with hcidump at the connection setup and show it to us. > > Regards > > Marcel > >