From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] Problem with Suse 9.0 and BlueZ From: Marcel Holtmann To: Paulo Wollny Cc: BlueZ Mailing List In-Reply-To: <409FFE21.7040601@wollny.com.br> References: <200405101448.i4AEmIK26418@home.iis.com.br> <1084201089.9639.1.camel@pegasus> <409FFE21.7040601@wollny.com.br> Content-Type: text/plain; charset=ISO-8859-1 Message-Id: <1084243741.25099.1.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Tue, 11 May 2004 04:49:02 +0200 Hi Paulo, > i installed hcidump, and did: > rfcomm bind 0 00:01:E3:22:59:E2 > echo "ATZ" > /dev/rfcomm0 >=20 > the result was: > paulo@hirscheberg:~> echo "ATZ" > /dev/rfcomm0 > bash: /dev/rfcomm0: Die Verbindung wurde vom Kommunikationspartner=20 > zur=FCckgesetzt > After giving in on the phone the pin number stored in /etc/bluetooth/pi= n >=20 > The output of hcidump -x for the above was: >=20 > hirscheberg:~ # /etc/rc.d/bluetooth restart > Shutting down=20 > bluetooth = done > Starting bluetooth ...(hci_usb hci_uart=20 > ) done > hirscheberg:~ # hcidump -x > HCIDump - HCI packet analyzer ver 1.8 > device: hci0 snap_len: 1028 filter: 0xffffffff > < HCI Command: Create Connection(0x01|0x0005) plen 13 > E2 59 22 E3 01 00 18 CC 01 00 00 00 01 > > HCI Event: Command Status(0x0f) plen 4 > 00 01 05 04 > > HCI Event: Connect Complete(0x03) plen 11 > 00 28 00 E2 59 22 E3 01 00 01 00 > < ACL data: handle 0x0028 flags 0x02 dlen 12 > L2CAP(s): Connect req: psm 3 scid 0x0040 > < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 > 28 00 0E 00 > > HCI Event: Number of Completed Packets(0x13) plen 5 > 01 28 00 01 00 > > HCI Event: Command Complete(0x0e) plen 6 > 01 0D 08 00 28 00 > > HCI Event: Max Slots Change(0x1b) plen 3 > 28 00 05 > > ACL data: handle 0x0028 flags 0x02 dlen 16 > L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 > < ACL data: handle 0x0028 flags 0x02 dlen 16 > L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 > MTU 1024 > > HCI Event: Number of Completed Packets(0x13) plen 5 > 01 28 00 01 00 > > ACL data: handle 0x0028 flags 0x02 dlen 18 > L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 4 > MTU 1024 > > ACL data: handle 0x0028 flags 0x02 dlen 16 > L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 > MTU 339 > < ACL data: handle 0x0028 flags 0x02 dlen 14 > L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > < ACL data: handle 0x0028 flags 0x02 dlen 8 > L2CAP(d): cid 0x40 len 4 [psm 3] > RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c > > HCI Event: Number of Completed Packets(0x13) plen 5 > 01 28 00 01 00 > > HCI Event: Number of Completed Packets(0x13) plen 5 > 01 28 00 01 00 > > ACL data: handle 0x0028 flags 0x02 dlen 8 > L2CAP(d): cid 0x40 len 4 [psm 3] > RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7 > < ACL data: handle 0x0028 flags 0x02 dlen 18 > L2CAP(d): cid 0x40 len 14 [psm 3] > RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8 > dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0 frame_size=20 > 334 max_retrans 0 credits 7 > > HCI Event: Number of Completed Packets(0x13) plen 5 > 01 28 00 01 00 > > ACL data: handle 0x0028 flags 0x02 dlen 17 > > ACL data: handle 0x0028 flags 0x01 dlen 1 > L2CAP(d): cid 0x40 len 14 [psm 3] > RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8 > dlci 2 frame_type 0 credit_flow 14 pri 0 ack_timer 0 frame_size=20 > 334 max_retrans 0 credits 2 > < ACL data: handle 0x0028 flags 0x02 dlen 8 > L2CAP(d): cid 0x40 len 4 [psm 3] > RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59 > > HCI Event: Number of Completed Packets(0x13) plen 5 > 01 28 00 01 00 > > HCI Event: PIN Code Request(0x16) plen 6 > E2 59 22 E3 01 00 > < HCI Command: PIN Code Request Negative Reply(0x01|0x000e) plen 6 > E2 59 22 E3 01 00 this is a PIN helper problem. Look at the mailing list archive to solve your problem. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users