From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-devel] BT3C ceased working in kernel 2.6.6 From: Marcel Holtmann To: David Woodhouse Cc: Antti =?ISO-8859-1?Q?M=E4kel=E4?= , BlueZ Mailing List In-Reply-To: <1084383638.4426.391.camel@hades.cambridge.redhat.com> References: <1084371696.4426.160.camel@hades.cambridge.redhat.com> <1084382223.25099.72.camel@pegasus> <1084383638.4426.391.camel@hades.cambridge.redhat.com> Content-Type: text/plain Message-Id: <1084384099.25099.98.camel@pegasus> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 12 May 2004 19:48:19 +0200 Hi David, > > right now I am not going to keep up with a new version of bluefw, > > because the bt3c_cs driver didn't use it anymore and for 2.6 the bcm203x > > kernel firmware loader works much better. However I am going to apply > > patches if they look correct. So this one is in CVS. > > I know it's obsolete for the PC card; is it no longer needed for USB > either with a 2.6 kernel? the bcm203x driver can be used to load the firmware into Broadcom based dongles. It doesn't replaces the bluefw, because in some cases it is better to not use an extra kernel module. However the method with the kernel driver for firmware loading is working much better for me. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel