From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-devel] AmbiCom BT2000C works with hciattach From: Marcel Holtmann To: Tony Lindgren Cc: BlueZ Mailing List In-Reply-To: <20040623031119.GA20367@atomide.com> References: <20040623031119.GA20367@atomide.com> Content-Type: text/plain Message-Id: <1087976062.4209.61.camel@pegasus> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 23 Jun 2004 09:34:22 +0200 Hi Tony, > Just FYI, there was some discussion here a while back on the > AmbiCom BT2000C, which is different from the earlier BT2000 > models. > > Well turns out it works fine with serial_cs + hciattach: > > hciattach /dev/ttyS1 csr -s 57600 57600 > or > hciattach /dev/ttyS1 csr -s 57600 460800 > hciconfig hci0 up > hcitool scan > ... > > Sorry if this was already old news :) Please CC me on any > replies, I'm not subscribing. how good these news are actually depends on what kernel you are using ;) Send me the output of "dump_cis" and I will add a line to hciattach for that. What is "hciconfig -a" saying? Regards Marcel ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel