From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Marcel Holtmann To: Zhikui Chen Cc: BlueZ Mailing List In-Reply-To: <40E41A18.8050201@po.uni-stuttgart.de> References: <40E40440.8070109@po.uni-stuttgart.de> <1088685238.4540.190.camel@pegasus> <40E40A44.60008@po.uni-stuttgart.de> <1088687188.4540.202.camel@pegasus> <40E412AA.4070908@po.uni-stuttgart.de> <1088689181.4540.216.camel@pegasus> <40E416AB.2040904@po.uni-stuttgart.de> <1088690093.4540.218.camel@pegasus> <40E41A18.8050201@po.uni-stuttgart.de> Content-Type: text/plain Message-Id: <1088691084.4540.232.camel@pegasus> Mime-Version: 1.0 Subject: [Bluez-users] Re: Help for bluez-bluefw-1.0. Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 01 Jul 2004 16:11:24 +0200 Hi Zhikui, > After I loaded uhci_hcd, I got: > [root@localhost root]# hciconfig -a > hci0: Type: USB > BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 > DOWN > RX bytes:0 acl:0 sco:0 events:0 errors:0 > TX bytes:0 acl:0 sco:0 commands:0 errors:0 > Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > Packet type: DM1 DH1 HV1 > Link policy: > Link mode: SLAVE ACCEPT > Normally, the report should have a non-zero value for some parameters, > the module uhci_hcd is not correct choice? or ehci_hcd or ohci_hcd? use "hciconfig hci0 up" and follow the newbie howtos from my site. Regards Marcel ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users