From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] ISSC USB Dongle does not work with current bluez? From: Marcel Holtmann To: Andreas Krause Cc: BlueZ Mailing List In-Reply-To: <200407231230.50970.Andreas.Krause@web.de> References: <200407222124.44032.Andreas.Krause@web.de> <200407230649.28305.Andreas.Krause@web.de> <1090570478.21828.47.camel@pegasus> <200407231230.50970.Andreas.Krause@web.de> Content-Type: text/plain Message-Id: <1090579307.4791.12.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Fri, 23 Jul 2004 12:41:47 +0200 Hi Andreas, > > That is the problem here, because the kernel thinks that the dongle is > > already in inquiry mode and won't start another one. Please stop hcid > > and sdpd. Unplug your dongle and replug it. Run "hcidump -x" and then > > call "hciconfig hci0 up". > > OK that worked. > Here's the dum while doing "hciconfig hci0 up": > > sweethome root # hcidump -x > HCIDump - HCI packet analyzer ver 1.9 > device: hci0 snap_len: 1028 filter: 0xffffffff > < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 > > HCI Event: Command Complete (0x0e) plen 12 > 01 03 10 00 FF FF 0D 00 00 00 00 00 > < HCI Command: Read Buffer Size (0x04|0x0005) plen 0 > > HCI Event: Command Complete (0x0e) plen 11 > 01 05 10 00 A6 02 30 0C 00 05 00 > < HCI Command: Read BD ADDR (0x04|0x0009) plen 0 > > HCI Event: Command Complete (0x0e) plen 10 > 01 09 10 00 9E 0B 00 67 11 00 > < HCI Command: Read Voice Setting (0x03|0x0025) plen 0 > > HCI Event: Command Complete (0x0e) plen 6 > 01 25 0C 00 60 00 > < HCI Command: Set Event Filter (0x03|0x0005) plen 2 > 00 00 > > HCI Event: Command Complete (0x0e) plen 4 > 01 05 0C 00 > < HCI Command: Write Page Timeout (0x03|0x0018) plen 2 > 00 80 > > HCI Event: Command Complete (0x0e) plen 4 > 01 18 0C 00 > < HCI Command: Write Connection Accept Timeout (0x03|0x0016) plen 2 > 00 7D > > HCI Event: Command Complete (0x0e) plen 4 > 01 16 0C 00 > < HCI Command: Write Scan Enable (0x03|0x001a) plen 1 > 03 > > HCI Event: Command Complete (0x0e) plen 4 > 01 1A 0C 00 > > > And here's the dump for "hcitool inq": > > < HCI Command: Inquiry (0x01|0x0001) plen 5 > 33 8B 9E 08 64 > > HCI Event: Command Status (0x0f) plen 4 > 00 01 01 04 I miss the inquiry complete event. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools! Get your free copy of BEA WebLogic Workshop 8.1 today. http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users