From: Dominik Blystak <Dominik.Blystak@pro-open.de>
To: bluez-users@lists.sourceforge.net
Subject: [Fwd: [Bluez-users] p3nfs drops connection]
Date: Fri, 23 Jul 2004 16:19:44 +0200 [thread overview]
Message-ID: <1090592384.2281.6.camel@localhost> (raw)
Hi,
after a talk with the developer of p3nfs I found the reason the trouble.
If you want to use p3nfsd you need nfs support compiled into the kernel.
Greets
Dominik Blystak
-----Forwarded Message-----
From: Dominik Blystak <Dominik.Blystak@pro-open.de>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] p3nfs drops connection
Date: Thu, 22 Jul 2004 23:10:34 +0200
Hi,
I hope nobody gets offended that I'm writing with an p3nfs issue to the
bluez-users list, but I believe that somebody around here might have
some experience with that tool and is willing to help a blueZ newbie ;)
The problem is, that my Siemens SX1 drops every p3nfs connection attemp.
As described in the manual I'm bringing up BT and the nfsclient on the
phone. Then I type:
#rfcomm bind 0 00:01:E3:2E:91:81 11
#p3nfsd -series60 -tty /dev/rfcomm0 -dir /mnt/sx1
The phone reacts with a message ("do you wish to allow this connec..")
and after pushing the "ok" button the connection drops.
The phone's lcd shows at first, "OK" and then "Connection closed
(-2147483647)"
At the terminal I get this output:
> p3nfsd: version 5.15, using /dev/rfcomm0 (115200), mounting on
/mnt/sx1
> p3nfsd: to stop the server do "ls /mnt/sx1/exit". (pid 2361)
> nfs mount /mnt/sx1: (errno 19) No such device
I put an hcidump (see bottom) on that problem to get further information
but im unexperienced in blueZ and I don't know what to do.
Thanks a lot
Dominik Blystak
#hcidump
HCIDump - HCI packet analyzer ver 1.5
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection(0x01|0x0005) plen 13
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Connect Complete(0x03) plen 11
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
< HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Command Complete(0x0e) plen 6
> HCI Event: Max Slots Change(0x1b) plen 3
> ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x004f scid 0x0040 result 1 status 2
> ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x004f scid 0x0040 result 0 status 0
< ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x004f flags 0x0000 clen 4
MTU 1024
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
< ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x004f flags 0x0000 result 0 clen 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0028 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 4
MTU 672
< ACL data: handle 0x0028 flags 0x02 dlen 8
L2CAP(d): cid 0x4f len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0028 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 0x0028 flags 0x02 dlen 18
L2CAP(d): cid 0x4f len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 22 frame_type 0 credit_flow 15 pri 7 ack_timer 0 frame_size
667 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0028 flags 0x02 dlen 18
L2CAP(d): cid 0x40 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 22 frame_type 0 credit_flow 14 pri 7 ack_timer 0 frame_size
667 max_retrans 0 credits 3
< ACL data: handle 0x0028 flags 0x02 dlen 8
L2CAP(d): cid 0x4f len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 22 pf 1 ilen 0 fcs 0xb8
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0028 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 22 pf 1 ilen 0 fcs 0x73
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(d): cid 0x4f len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 22 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 0 b3 0 len 0
< ACL data: handle 0x0028 flags 0x02 dlen 8
L2CAP(d): cid 0x4f len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 22 pf 1 ilen 0 fcs 0x59
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(d): cid 0x40 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 22 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 0 b3 0 len 0
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(d): cid 0x4f len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 22 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 0 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0028 flags 0x02 dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 22 pf 1 ilen 0 fcs 0x73
< ACL data: handle 0x0028 flags 0x02 dlen 8
L2CAP(d): cid 0x4f len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x004f scid 0x0040
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0028 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x004f scid 0x0040
< HCI Command: Disconnect(0x01|0x0006) plen 3
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Disconn Complete(0x05) plen 4
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next reply other threads:[~2004-07-23 14:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-07-23 14:19 Dominik Blystak [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-07-23 14:19 [Fwd: [Bluez-users] p3nfs drops connection] Dominik Blystak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1090592384.2281.6.camel@localhost \
--to=dominik.blystak@pro-open.de \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox