From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] IOGear GBU301 and Kernel 2.4.20 From: Marcel Holtmann To: tsw@johana.com Cc: BlueZ Mailing List In-Reply-To: <20040808234025.26402.qmail@web60805.mail.yahoo.com> References: <20040808234025.26402.qmail@web60805.mail.yahoo.com> Content-Type: text/plain Message-Id: <1092009001.2773.57.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Mon, 09 Aug 2004 01:50:01 +0200 Hi Tom, > > why don't include the content of /proc/bus/usb/devices? > > > Your wish is my command.... > > >>>>> > T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=12 MxCh= 0 > D: Ver= 1.01 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0a5c ProdID=2033 Rev= 0.a0 > C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms > I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms > E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms > <<<<< > > The above is just the part that is different between plugging in the IOGear > adapter and not. I didn't want to complicate things with too much clutter this is a Broadcom BCM2033 dongle without firmware loaded. Install the bluez-firmware package and use the bcm203x kernel driver from a recent 2.6 kernel or compile bluez-utils-2.9 with bcm203x support. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users