From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-devel] "comlicated" setup - known issues for hid and SCO? From: Marcel Holtmann To: Lars Grunewaldt Cc: BlueZ Mailing List In-Reply-To: <4117B376.3030507@dark-reality.de> References: <4117A907.7010006@dark-reality.de> <1092071597.4564.17.camel@pegasus> <4117B376.3030507@dark-reality.de> Content-Type: text/plain Message-Id: <1092073484.4564.32.camel@pegasus> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Mon, 09 Aug 2004 19:44:44 +0200 Hi Lars, > | what does "hcitool info ..." say about your headset? What is the > | firmware version of your EPoX dongle? > | > | > Headset: > ~ BD Address: 00:0E:07:33:DE:2B > ~ Device Name: HBH-35 > ~ LMP Version: 1.1 (0x1) LMP Subversion: 0x8d40 > ~ Manufacturer: Ericsson Technology Licensing (0) > ~ Features: 0xbc 0x28 0x01 0x00 0x00 0x00 0x00 0x00 > ~ > ~ I don't see the hold mode. This can cause problem if they form a scatternet. When both are connect what does "hcitool con" say? > How can I find out what firmware my dongle has? It's a BT-DG03... Use "hciconfig hci0 revision" as root. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel