From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] Re: Bluez setup and Bluetooth stack and 2.6 kernel From: Marcel Holtmann To: gonzalo briceno Cc: BlueZ Mailing List In-Reply-To: <20040826141810.46943.qmail@web52608.mail.yahoo.com> References: <20040826141810.46943.qmail@web52608.mail.yahoo.com> Content-Type: text/plain Message-Id: <1093530808.2581.30.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 26 Aug 2004 16:33:28 +0200 Hi Gonzalo, > So what I gather is that the bluez.o module > functionality is already part of the bluetooth.ko > module. Is there anything else I need to know in > terms of what modules need to be loaded for things to > work? The reason for asking is that most > documentation I have read so far is most likely old > and refers to bluez.o. To make a long story short > does the following seem correct to get USB and > Bluetooth to work (using kernel 2.6) barring any other > problems: > > 1. load usbcore > 2. load proper USB host driver (OHCI, UHCI, EHCI) > 3. load bluetooth.ko > 4. load (RFCOMM, L2CAP, BNEP, etc) this is correct, but you can leave step 1 and 3 out, because the module dependency will take of that these are also loaded. However you forgot the Bluetooth hardware driver. In general this is the hci_usb driver for the H:2 transport protocol support. Regards Marcel ------------------------------------------------------- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users