On Wed, 2004-09-22 at 10:47, Marcel Holtmann wrote:
> Hi Ian,
> 
> > Since some kernel version i can't exactly remember which, i have been
> > unable to use usb, i have tested with with 2.6.8 -> 2.6.9-rc2-bk7 and i
> > also applied your patches for 2.6.8.
> > 
> > I have 2 usb dongles, one old that did work once, and one new that seems
> > to be working like the older but it doesn't work with linux.
> > 
> > Both are based on the CSR chipset, here is the new ones entry from the
> > hw support list:
> > MSI MS-6967 CSR 1.1 hci_usb working Dave Beckett
> > 
> > Som logs from insertions:
> > usb 1-3.4: new full speed USB device using address 12
> > ehci_hcd 0000:00:02.2: qh f7e54780 (#0) state 1
> > hci_usb_intr_rx_submit: hci0 intr rx submit failed urb d968cd74 err -28
> > 
> > usb 1-4.4: new full speed USB device using address 13
> > ehci_hcd 0000:00:02.2: qh f7e54900 (#0) state 1
> > hci_usb_intr_rx_submit: hci1 intr rx submit failed urb d315eef4 err -28
> > 
> > both of these are connected to usb 2.0 hubs (this machine does usb 2.0)
> 
> this looks like an USB problem to me. Try to connect it to USB 1.1 ports
> and see if this works.

The problem is, this computer doesn't have a usb 1.1 port.
But it should basically fallback, and afair it worked with a cable
direct to the computer, i haven't tested that since... because i need
the hubs.

But if it indeed is a usb 1.1  vs 2.0 problem then it has to be
something broken in the kernel... Anyone else using this with usb 2.0?

-- 
Ian Kumlien <pomac () vapor ! com> -- http://pomac.netswarm.net