Re: [Bluez-users] Re: Bluetooth modem under SuSE 9.1

Marcel Holtmann
2004-09-28T08:12:25Z

Hi,

> > install the udev package and everything should be fine.
>
> Hm, it seems that installing udev is not the whole thing. In fact it was
> already installed on one of the boxes I tried.
>
> I suppose /dev/rfcomm0 should be generated by hotplug and udev when
> plugging in the bluetooth adapter? Unfortunately this does not happen.
> In /var/log/messages I found the following entries:
>
> > kernel: usb 1-1: new full speed USB device using address 2
> > kernel: usb 1-1: Product: SiW
> > kernel: usb 1-1: Manufacturer: SiW
> > kernel: usb 1-1: SerialNumber: D0BC400D0B00
> > hcid[2181]: HCI dev 0 registered
> > hcid[2181]: HCI dev 0 up
> > hcid[2181]: Starting security manager 0
> > /etc/hotplug/usb.agent[3858]: need a device for this command
> > /etc/hotplug/usb.agent[3861]: need a device for this command
>
> Can you give me a hint what to do? Even if the device file was generated
> properly I think it will still be deleted when disconnecting?

maybe your bluez-utils version is too old. Some older versions can't
wait until the device is created by udev. Newer versions should work
like a charm.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net