From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <bluez-users-admin@lists.sourceforge.net>
Subject: Re: [Bluez-users] Re: pand freezes upon disconnect
From: Marcel Holtmann <marcel@holtmann.org>
To: O Plameras <oscarp@acay.com.au>
Cc: bluez-users@lists.sourceforge.net
In-Reply-To: <cjad82$qji$1@sea.gmane.org>
References: <E1CA5Ze-0006Iu-R6@paris.servershost.net>
	 <cjad82$qji$1@sea.gmane.org>
Content-Type: text/plain
Message-Id: <1096371695.4950.2.camel@notepaq>
Mime-Version: 1.0
Sender: bluez-users-admin@lists.sourceforge.net
Errors-To: bluez-users-admin@lists.sourceforge.net
List-Unsubscribe: <https://lists.sourceforge.net/lists/listinfo/bluez-users>,
	<mailto:bluez-users-request@lists.sourceforge.net?subject=unsubscribe>
List-Id: <bluez-users.lists.sourceforge.net>
List-Post: <mailto:bluez-users@lists.sourceforge.net>
List-Help: <mailto:bluez-users-request@lists.sourceforge.net?subject=help>
List-Subscribe: <https://lists.sourceforge.net/lists/listinfo/bluez-users>,
	<mailto:bluez-users-request@lists.sourceforge.net?subject=subscribe>
List-Archive: <http://sourceforge.net/mailarchive/forum.php?forum=bluez-users>
Date: Tue, 28 Sep 2004 13:41:35 +0200

Hi,

> I have a similar problem but my clients are Linux FC2. When I close
> my connection from Linux clients the server has to be rebooted as it
> freezes. I also tried shutdown the the following in sequence and the
> server also freezes.
> 
> ifconfig bnep0 down
> ifconfig bnep1 down
> brctl delif br0 bnep0
> brctl delif bro bnep1
> hciconfig hci0 down ................
> 
> My server is Fedora Core 2 with kernel-2.6.8.1-mm4. It is
> also a bridge-router-firewall (firewall = www.shorewall.net).
> I also tried patching my server with patch-2.6.8-mh2 with the
> same results. Can anyone help ?
> 
> [root@compaq src]#hci0:   Type: USB
>          BD Address: 00:10:60:A7:DD:45 ACL MTU: 192:8  SCO MTU: 64:8
>          UP RUNNING PSCAN ISCAN
>          RX bytes:1484873 acl:44063 sco:0 events:26226 errors:0
>          TX bytes:5589996 acl:32995 sco:0 commands:29 errors:0
>          Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
>          Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
>          Link policy: RSWITCH HOLD SNIFF PARK
>          Link mode: ACCEPT MASTER
>          Name: 'compaq.noy.com.au'
>          Class: 0x000100
>          Service Classes: Unspecified
>          Device Class: Computer, Uncategorized
>          HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP 
> Subver: 0x20d
>          Manufacturer: Cambridge Silicon Radio (10)
> 
> [root@compaq src]#brctl show
> bridge name     bridge id               STP enabled     interfaces
> br0             8000.00105a67f2a1       yes             eth0
>                                                          eth1
>                                                          bnep0
>                                                          bnep1
> [root@compaq src]#
> 
> My clients are Fedora Core 2 with kernel-2.6.8.1-mm4
> 
> I have:
> bluez-sdp-1.5-1
> bluez-pan-1.1-1
> bluez-firmware-1.0
> bluez-hcidump-1.12
> bluez-hciemu-1.0
> bluez-libs-2.10
> bluez-pin-0.24
> bluez-utils-2.10
> 
> in my server and clients.

there is no need to have bluez-sdp and bluez-pan installed. Remove them
and only use latest bluez-libs and bluez-utils.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users