From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-devel] Question about hciconfig... From: Marcel Holtmann To: Michael Frey Cc: BlueZ Mailing List In-Reply-To: <721F30FA-17CA-11D9-8894-00039390D626@pepper.com> References: <721F30FA-17CA-11D9-8894-00039390D626@pepper.com> Content-Type: text/plain Message-Id: <1097091489.7325.1.camel@pegasus> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 06 Oct 2004 21:38:09 +0200 Hi Michael, > After looking at the hciconfig code I notices that the Max speed for an > ericsson uart module is maxed out at 115200. > > { "ericsson", 0x0000, 0x0000, HCI_UART_H4, 57600, 115200, FLOW_CTL, > ericsson }, > > > Am I interpreting this correct? If so why the upper limit? > > UARTS can go faster than 115200. this is the default value, because most serial ports on motherboards can only do 115200 max. If you own a high speed UART, you can overwrite this value from the command line. Regards Marcel ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel