From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Erwin Authried To: bluez-users@lists.sourceforge.net Content-Type: text/plain Message-Id: <1098480115.3258.61.camel@justakiss> Mime-Version: 1.0 Subject: [Bluez-users] lockup problem with larger packets Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Fri, 22 Oct 2004 23:21:55 +0200 I have cross-compiled bluez for uClinux-2.4.20 for ARM7, with the bluez kernel patch applied, and bluez-utils 2.10. I'm using the Conceptronic CBT100C PCMCIA card on the system. The card is initialized with "hciattach ttyS2 bcsp". Basically, the system works fine, but I see occasional overrun errors on the UART, maybe because the ARM7 is running with 40MHz only. When I transmit larger packets (l2ping -s 300 ...), the number of overrun errors increases, and sometimes the system locks up. I'm getting an endless sequence of: bcsp_pkt_cull: Peer acked invalid packet bcsp_handle_le_pkt: Found a LE sync pkt, card has reset bcsp_pkt_cull: Peer acked invalid packet bcsp_handle_le_pkt: Found a LE sync pkt, card has reset bcsp_pkt_cull: Peer acked invalid packet ... Regards, Erwin ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users