Re: [Bluez-users] Broadcom Corporation (Firmware 105.105.074) USB dongle

[Marcel Holtmann <marcel@holtmann.org>]

Hi Hans,

> > please send us the content of /proc/bus/usb/devices and you can try the
> > attached patch.
> 
> T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> ....................(the host controller) ...........
> 
> T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  6 Spd=12  MxCh= 3
> .....................(other sys).................
> 
> T:  Bus=01 Lev=02 Prnt=06 Port=00 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=0a5c ProdID=2009 Rev= 1.00
> S:  Manufacturer=Broadcom
> S:  Product=BCM92035DGL
> S:  SerialNumber=000272C0111C
> C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  32 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  32 Ivl=1ms
> I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  64 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  64 Ivl=1ms
> I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  64 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  64 Ivl=1ms
> I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
> E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
> I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
> 
> T:  Bus=01 Lev=02 Prnt=06 Port=01 Cnt=02 Dev#=  8 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0a5c ProdID=3502 Rev= 1.00
> S:  SerialNumber=000272C0111C
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=usbhid
> E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
> 
> T:  Bus=01 Lev=02 Prnt=06 Port=02 Cnt=03 Dev#=  9 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0a5c ProdID=3503 Rev= 1.00
> S:  SerialNumber=000272C0111C
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
> E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=10ms

any additional information about this dongle? Link to a website or so?
 
> > The CSR based dongles actually make less problems. If you don't need it
> > anymore, you can donate it to me, because I really need these kind of
> > dongles for testing.
> 
> i'll keep it in mind
> 
> Kernel 2.6.10rc1 + patch is compiling now...

Does it work? If yes, send in the output from "hciconfig -a".

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users