[Bluez-devel] Problem with Billionton PCMCIA card

Marcin Michalak
2004-11-02T10:56:34Z

Hello,
I'm trying to make Billionton PCMCIA card work on Linux. It seems it
is similar to other cards, like ZOOM CF, which should work...
CIS_dump shows:
-------------------
Socket 0:
dev_info
NULL 0ns, 512b
manfid 0x0279, 0x950b
funcid serial_port [post]
serial_interface
uart 16550 [space/mark/odd/even] [5/6/7/8] [1/1.5/2]
vers_1 7.1, "PCMCIA", "Bluetooth Card", "", ""
config base 0x00f8 mask 0x000f last_index 0x04
cftable_entry 0x01 [default]
[rdybsy]
Vcc Vnom 3300mV
io 0x03f8-0x0407 [lines=8] [8bit] [range]
irq mask 0xffff [level] [shared]
cftable_entry 0x02
io 0x0000-0x7fff [lines=15] [8bit]
--------------------
I copied btuart.conf to /etc/pcmcia/ and the module is loading, but
there's some problem:
btuart_config: No usable port range found
btuart_cs: RequestIO: No more items
Any ideas how it could be solved? I tried hciattach on the serial
port, but with bcsp it hangs the whole system;-)
Hope this will work,
Marcin
----------------------------------------------------------
Marcin Michalak Research Engineer
Mobile: +41 79 330 83 51 Telscom AG