Re: [Bluez-devel] Problem with Billionton PCMCIA card

[Marcel Holtmann <marcel@holtmann.org>]

Hi Marcin,

> > > about what kernel version and what platform are we talking? Actually
> > > using hci_uart with BCSP and hciattach works perfect with the Zoom card.
> > > The btuart_cs is not the way to go and I will remove this driver in the
> > > future.
> > 
> >  I compiled kernel 2.6.9 with the latest patch (mh3). Platform is 
> > laptop with Pentium IV.
> > After removing btuart.conf I get:
> > 
> > cs: memory probe 0xa0000000-0xa0ffffff: clean.
> > ttyS10 at I/O 0x100 (irq = 10) is a 16C950/954
> > 
> 
>  It works with kernel 2.4.20 from RedHat 9, and doesn't hang. Still, 
> no idea why it hangs on the other one.

the serial drivers in 2.6 has changed and this might be the problem. Do
you used the same hciattach command that I used for the Zoom card?

>  Thanks for the tip, you can change it on Hardware support list. The 
> card is very cheap for PCMCIA and it is Class 1.

I thought of creating a new page for the serial based Bluetooth PCMCIA
and CF cards. I need to add the information about hciattach and with
what kernel version they work or not.

Do you wanna donate one of these cards so that I can take a look at it?

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel