From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: RE: [Bluez-users] Connection failed error (110) From: Marcel Holtmann To: KEYUR DESAI Cc: BlueZ Mailing List In-Reply-To: References: Content-Type: text/plain Message-Id: <1099446446.7125.68.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 03 Nov 2004 02:47:26 +0100 Hi Keyur, there must be a "Reply to All" button in the your mail client ;) > Here is my result of hcidump -X while doing > > > calhost keyur]$ su > Password: > [root@localhost keyur]# hciconfig hci0 up > [root@localhost keyur]# hciconfig hci0 down > [root@localhost keyur]# hciconfig hci0 up > Can't init device hci0. Connection timed out(110) > [root@localhost keyur]# hciconfig hci0 up > Can't init device hci0. Connection timed out(110) > [root@localhost keyur]# hciconfig hci0 > hci0: Type: USB > BD Address: 00:0A:3A:50:4B:4D ACL MTU: 192:8 SCO MTU: 64:8 > DOWN > RX bytes:83 acl:0 sco:0 events:10 errors:0 > TX bytes:40 acl:0 sco:0 commands:11 errors:0 > > [root@localhost keyur]# /etc/init.d/bluetooth start > Starting Bluetooth subsystem: hcid sdpd rfcomm. > [root@localhost keyur]# hciconfig hci0 up > Can't init device hci0. Connection timed out(110) > [root@localhost keyur]# > > > > root@localhost keyur]# hcidump -X > HCIDump - HCI packet analyzer ver 1.12 > device: hci0 snap_len: 1028 filter: 0xffffffff > < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 > >HCI Event: Command Status (0x0f) plen 4 > 0000: 00 01 00 00 .... > < HCI Command: Read Buffer Size (0x04|0x0005) plen 0 > >HCI Event: Command Complete (0x0e) plen 12 > 0000: 01 03 10 00 ff ff 0f 00 00 00 00 > 00 ............ > < HCI Command: Read BD ADDR (0x04|0x0009) plen 0 > >HCI Event: Command Complete (0x0e) plen 11 > 0000: 01 05 10 00 c0 00 40 08 00 08 00 ......@.... > < HCI Command: Read Voice Setting (0x03|0x0025) plen 0 > >HCI Event: Command Complete (0x0e) plen 10 > 0000: 01 09 10 00 4d 4b 50 3a 0a 00 ....MKP:.. > < HCI Command: Set Event Filter (0x03|0x0005) plen 2 > 0000: 00 00 .. > >HCI Event: Command Complete (0x0e) plen 6 > 0000: 01 25 0c 00 60 00 .%..`. > < HCI Command: Write Page Timeout (0x03|0x0018) plen 2 > 0000: 00 80 .. > >HCI Event: Command Complete (0x0e) plen 4 > 0000: 01 05 0c 12 .... > < HCI Command: Write Connection Accept Timeout (0x03|0x0016) plen 2 > 0000: 00 7d .} > >HCI Event: Command Complete (0x0e) plen 4 > 0000: 01 18 0c 00 .... > >HCI Event: Command Complete (0x0e) plen 4 > 0000: 01 16 0c 00 .... > < HCI Command: Write Scan Enable (0x03|0x001a) plen 1 > 0000: 03 . > >HCI Event: Command Complete (0x0e) plen 4 > 0000: 01 1a 0c 00 .... > < HCI Command: Reset (0x03|0x0003) plen 0 > >HCI Event: Command Complete (0x0e) plen 4 > 0000: 01 03 0c 00 .... > < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 > > > Also regarding the kernel confirmation > > I did a uname -a and I get > > Linux localhost.localdomain 2.6.5-1.358 # Sat May 8 ..... please try the latest 2.6.10-rc1-bk12 and repeat these steps. What is your kernel config (only the CONFIG_BT_* part)? Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: Sybase ASE Linux Express Edition - download now for FREE LinuxWorld Reader's Choice Award Winner for best database on Linux. http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users