On Mon, 2004-11-08 at 19:57, Marcel Holtmann wrote:
> Hi Daniel,
> 
> > I have a question: for my mobile I use an HAMA Bluetooth headset. If I 
> > buy a bluetooth PCMCIA card for my notebook, will I be able to use this 
> > headset with this card? recognized as a second soundcard? as a normal 
> > headset for my integrate soundcard? recognized by my software phone 
> > clients? If I buy an USB bluetooth device, would it be the same? better?
> 
> actually this is not an easy to answer question. First thing is that you
> should get a Bluetooth device with a CSR chip and at least HCI 16.x
> firmware on it. The second is that it must route the SCO traffic through
> the HCI and via a PCM. Then it should be possible.

How to identify version 16.x or higher ? hciconfig -a only gives a
hexadecimal value, that not really gives me get a clue on the firmware
version.

HCI Ver: 1.1 (0x1) HCI Rev: 0xbc LMP Ver: 1.1 (0x1) LMP Subver: 0xbc

Kind regards,
Martin List-Petersen