Marcel,

Sorry about the top-posting, but I want to be quick.  Tried to get 2.6.9
compiling under powerpc with GCC 2.95, but found that a lot of the PPC
arch source will only compile under GCC 3.3.x   System compiler on
Debian Sarge (my laptop ) is GCC 3.3.4.

Will get on with getting the problems traced tonight, and find where
things are going wrong hopefully.  Should have a patch after this
weekend.

Cheers,

Matthew

On Tue, 2004-11-09 at 08:53, Marcel Holtmann wrote:
> Hi Matthew,
> 
> > Just got debug going.  Going to put printks into hidp_get_connlist to
> > see what is happening.
> > 
> > Your comment on the big endian bug in the L2CAP you noticed below, and
> > some of the debug I have seen with the other BT problems make it look
> > like I am having endianess issues. 
> > 
> > I am going to print the kernel code tonight and read it through as it is
> > obvious I have to understand the stack if I am get things fixed - you
> > don't have access to an Apple machine to test things on.  In the past I
> > was a commercial router programmer, doing OSPF and IPX development.
> > 
> > Any good places to find protocol specs?  I especially need
> > specifications on the endianess of the incoming BT data so I can audit
> > and check the debug for that sort of thing.
> 
> everything is in the Bluetooth core and HID profile specification.
> 
> It must not be an endian problem, because other people with Apple
> machines are using HID. May you wanna try another compiler.
> 
> Regards
> 
> Marcel
> 
-- 
===============================================================================
Matthew Grant        /\  ^/\^   grantma@anathoth.gen.nz      /~~~~\
A Linux Network Guy /~~\^/~~\_/~~~~~\_______/~~~~~~~~~~\____/******\
===GPG KeyID: 2EE20270  FingerPrint: 8C2535E1A11DF3EA5EA19125BA4E790E2EE20270==