From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] rfcomm problems From: Marcel Holtmann To: BlueZ Mailing List In-Reply-To: <200411241854.13007.adq_dvb@lidskialf.net> References: <200411241854.13007.adq_dvb@lidskialf.net> Content-Type: text/plain Message-Id: <1101325813.7538.6.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 24 Nov 2004 20:50:13 +0100 Hi Andrew, > Hi, I'm using linux kernel 2.6.9, gentoo, bluez-utils/libs 2.10. > I have a Nokia 3650, with firmware 3.16. > > I've initially been just trying to connect to the phone using rfcomm... > > rfcomm connect 0 MACADDR 1 > > this works - I get the "Press Ctrl-C to hangup" and /dev/rfcomm0 appears > (using udev BTW). > > I then try to use minicom on /dev/rfcomm0. It opens it OK, but nothing > happens... I mean, I send AT commands at it, but I get no response. Do I have > to use a certain set of serial port settings (I've tried quite a few)? No. This should simply work. However some people complained about that minicom and RFCOMM TTY do not work very good together. The BlueZ utils packages contains test/attest.c and you should give it a try. > I also tried running hcidump whilst typing stuff in minicom - nothing was > logged. Do you started hcidump as root? You must see at least the RFCOMM channel setup. Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users