From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] Nokia 7610 file transfer to computer From: Stefan Torkel To: bluez-users@lists.sourceforge.net In-Reply-To: <1102577073.9988.92.camel@pegasus> References: <1102381335.13235.8.camel@nephlim.homenet> <1102406104.8447.15.camel@pegasus> <1102438800.21032.3.camel@nephlim.homenet> <1102478181.8447.52.camel@pegasus> <1102553068.22127.5.camel@nephlim.homenet> <1102577073.9988.92.camel@pegasus> Content-Type: text/plain Message-Id: <1102590679.24852.3.camel@nephlim.homenet> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 09 Dec 2004 12:11:19 +0100 Hi Marcel, > actually I asked for "hcidump -X" and not "hcidump -x" and it seems that > the RFCOMM channel assignment of OBEX don't works. Must be because the > 7610 has a quite crazy way to ask for the OBEX push service record. So > you should try "hcidump --obex=3 -X". Here is the output for hcidump --obex=3 -X HCIDump - HCI packet analyzer ver 1.16 device: hci0 snap_len: 1028 filter: 0xffffffff > HCI Event: Connect Request (0x04) plen 10 0000: c4 0f 15 ed 0e 00 0c 02 50 01 ........P. < HCI Command: Accept Connection Request (0x01|0x0009) plen 7 0000: c4 0f 15 ed 0e 00 01 ....... > HCI Event: Command Status (0x0f) plen 4 0000: 00 01 09 04 .... > HCI Event: Max Slots Change (0x1b) plen 3 0000: 01 00 05 ... > ACL data: handle 0x0001 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 1 scid 0x0043 > HCI Event: Connect Complete (0x03) plen 11 0000: 00 01 00 c4 0f 15 ed 0e 00 01 00 ........... < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 0000: 01 00 0f 00 .... > HCI Event: Max Slots Change (0x1b) plen 3 0000: 01 00 05 ... > HCI Event: Command Complete (0x0e) plen 6 0000: 01 0d 08 00 01 00 ...... < HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4 0000: 01 00 18 cc .... > HCI Event: Command Status (0x0f) plen 4 0000: 00 01 0f 04 .... > HCI Event: Connection Packet Type Changed (0x1d) plen 5 0000: 00 01 00 18 cc ..... > HCI Event: Disconn Complete (0x05) plen 4 0000: 00 01 00 13 .... So it still doesn't work. What should I do. I want to get this working. It's so bad... > The problem is that we get the ACL data for the SDP L2CAP channel before > we got the connect complete for the ACL link. You can't send any data > when your underlaying link is not fully established. What kind of dongle > are you using (hciconfig -a) and what phone (hcitool info)? Dongle info: hci0: Type: USB BD Address: 00:0B:0D:21:D7:54 ACL MTU: 339:4 SCO MTU: 64:0 UP RUNNING PSCAN ISCAN RX bytes:4898 acl:63 sco:0 events:465 errors:0 TX bytes:3038 acl:52 sco:0 commands:201 errors:0 Features: 0xff 0xff 0x3d 0x00 0x00 0x00 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'BlueZ (0)...?...' Class: 0x3e0100 Service Classes: Networking, Rendering, Capturing Device Class: Computer, Uncategorized HCI Ver: 1.1 (0x1) HCI Rev: 0x93 LMP Ver: 1.1 (0x1) LMP Subver: 0x93 Manufacturer: Transilica, Inc. (24) And phone?? It's a 7610 you should know... Or what do you mean? Best regards Stefan Torkel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users