From: Marcel Holtmann <marcel@holtmann.org>
To: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] 'hciconfig -a' ok, but 'hcitools scan' shows no devices
Date: Sun, 12 Dec 2004 09:06:04 +0100 [thread overview]
Message-ID: <1102838764.8750.32.camel@pegasus> (raw)
In-Reply-To: <50745.80.146.4.18.1102837718.squirrel@schrell.de>
Hi Andreas,
> And hcidump -X from "hciconfig -a" and "hcitool scan":
>
> HCIDump - HCI packet analyzer ver 1.12
> device: hci0 snap_len: 1028 filter: 0xffffffff
> < HCI Command: Read Local Name (0x03|0x0014) plen 0
> > HCI Event: Command Complete (0x0e) plen 252
> 0000: 01 14 0c 00 64 65 6c 6c 69 2d 30 00 00 00 00 00 ....delli-0.....
> 0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 0080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 00a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 00b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 00d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 00e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 00f0: 00 00 00 00 00 00 00 00 00 00 00 00 ............
> < HCI Command: Read Class of Device (0x03|0x0023) plen 0
> > HCI Event: Command Complete (0x0e) plen 7
> 0000: 01 23 0c 00 00 01 00 .#.....
> < HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> > HCI Event: Command Complete (0x0e) plen 12
> 0000: 01 01 10 00 02 f2 04 02 0a 00 f2 04 ............
> < HCI Command: Inquiry (0x01|0x0001) plen 5
> 0000: 33 8b 9e 08 64 3...d
> > HCI Event: Command Status (0x0f) plen 4
> 0000: 00 01 01 04 ....
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Inquiry Complete (0x01) plen 1
> 0000: 00 .
this looks not good, because you shouldn't get any vendor events from
your Bluetooth chip. Is Bluetooth working for you under Windows?
> I can switch Bluetooth off and on. If I press the button I get
>
> < HCI Command: Reset (0x03|0x0003) plen 0
> Receive failed: Broken pipe
>
> and in syslog
>
> Dec 12 08:44:57 localhost kernel: atkbd.c: Unknown key pressed (translated
> set 2, code 0x88 on isa0060/serio0).
> Dec 12 08:44:57 localhost kernel: atkbd.c: Use 'setkeycodes e008
> <keycode>' to make it known.
> Dec 12 08:44:57 localhost kernel: usb 1-2: USB disconnect, address 6
> Dec 12 08:44:57 localhost hcid[9862]: HCI dev 0 down
> Dec 12 08:44:57 localhost hcid[9862]: Stoping security manager 0
> Dec 12 08:44:57 localhost hcid[9862]: HCI dev 0 unregistered
>
> next time I get
> Dec 12 08:46:06 localhost hcid[9862]: HCI dev 0 up
> Dec 12 08:46:06 localhost hcid[9862]: Starting security manager 0
> Dec 12 08:46:09 localhost usb.agent[25983]: hci_usb: already loaded
> Dec 12 08:46:09 localhost usb.agent[25988]: hci_usb: already loaded
> Dec 12 08:46:09 localhost usb.agent[25993]: hci_usb: already loaded
>
> Look ok for me.
This is exactly how it should be. The complete Bluetooth module is
physically connected/disconnected from the USB bus.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2004-12-12 8:06 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-11 22:07 [Bluez-users] "hciconfig -a" ok, but "hcitools scan" shows no devices Andreas Schrell
2004-12-11 22:41 ` Marcel Holtmann
2004-12-12 7:48 ` [Bluez-users] 'hciconfig -a' ok, but 'hcitools scan' " Andreas Schrell
2004-12-12 8:06 ` Marcel Holtmann [this message]
2004-12-12 10:38 ` [Bluez-users] SOLVED: Dell Inspiron 8600 was: " Andreas Schrell
2004-12-12 11:42 ` Marcel Holtmann
2004-12-13 17:17 ` Andreas Schrell
2004-12-13 20:01 ` Marcel Holtmann
2004-12-14 9:36 ` Andreas Schrell
2004-12-14 9:56 ` Marcel Holtmann
2004-12-14 21:23 ` Andreas Schrell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1102838764.8750.32.camel@pegasus \
--to=marcel@holtmann.org \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox