From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: RE: [Bluez-devel] Question about role switch From: Marcel Holtmann To: BlueZ Mailing List In-Reply-To: References: Content-Type: text/plain Message-Id: <1103131447.8717.17.camel@pegasus> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 15 Dec 2004 18:24:07 +0100 Hi Richard, > But, the Windows PC and the Linux PC use the same USB Anycomm dongle. The Windows PC > is able to communicate with the X-scale Bluez system. The Linux PC can not. > I think this points to something that Windows is doing differently. actually I overlooked one thing. You must activate rswitch in the link policy, because otherwise the role switch will be rejected. > BTW, the HCI number you quote "16.4" ....How do I get that number ? > Is that available from hciconfig -a ? Is that one of the values in the dump below ? You can use "hciconfig hci0 revision" or look at my CSR page. Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel