From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Markus Uhr To: bluez-users@lists.sourceforge.net Content-Type: text/plain Message-Id: <1104589274.10387.9.camel@localhost> Mime-Version: 1.0 Subject: [Bluez-users] IBM Bluetooth PC Card II Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sat, 01 Jan 2005 15:21:14 +0100 Hello In http://www.holtmann.org/linux/bluetooth/devices.html the IBM Bluetooth PC Card II is reported to work with the hci_uart driver. However, when I insert to card into my computer I get these Log-Messages: Jan 1 14:06:08 [cardmgr] socket 0: IBM Bluetooth PC Card II Jan 1 14:06:08 [cardmgr] executing: 'modprobe serial_cs' Jan 1 14:06:08 [cardmgr] get dev info on socket 0 failed: No such device Jan 1 14:06:08 [kernel] serial_cs: no usable port range found, giving up Jan 1 14:06:08 [kernel] serial_cs: RequestIO: No more items So, has anybody an idea what could be wrong that the PCMCIA subsystem doesn't initialize the card properly? Do I need to pass some special parameters? My config entry in /etc/pcmcia/bluetooth.conf for the card: card "IBM Bluetooth PC Card II" version "IBM", "Bluetooth PC Card II", "", "" bind "serial_cs" class "bluetooth" Is anything wrong with that? Markus Uhr ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users