From: Marcel Holtmann <marcel@holtmann.org>
To: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] Piconet problems
Date: Fri, 14 Jan 2005 22:18:55 +0100 [thread overview]
Message-ID: <1105737535.7525.48.camel@pegasus> (raw)
In-Reply-To: <IAAY31$664B7AA9753F60F7A4D5D72B66AB0F53@libero.it>
Hi Jers,
> > send us the outputs of "hciconfig -a" for all of your devices. And don't
> > play with "hcitool cc". If you wanna test stuff then use l2test.
>
> hci0: Type: USB
> BD Address: 00:08:E0:01:9E:86 ACL MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:653 acl:0 sco:0 events:19 errors:0
> TX bytes:314 acl:0 sco:0 commands:18 errors:0
> Features: 0xff 0xff 0x0b 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'PC A'
> Class: 0x3e0100
> Service Classes: Networking, Rendering, Capturing
> Device Class: Computer, Uncategorized
> HCI Ver: 1.1 (0x1) HCI Rev: 0x33c LMP Ver: 1.1 (0x1) LMP Subver: 0x33c
> Manufacturer: Cambridge Silicon Radio (10)
>
> hci0: Type: USB
> BD Address: 00:E0:98:85:A1:64 ACL MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:99 acl:0 sco:0 events:13 errors:0
> TX bytes:296 acl:0 sco:0 commands:12 errors:0
> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'BlueZ (0)'
> Class: 0x3e0100
> Service Classes: Networking, Rendering, Capturing
> Device Class: Computer, Uncategorized
> HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver: 0x175
> Manufacturer: Cambridge Silicon Radio (10)
the 0x175 firmwares are not HCI 16.4 and thus don't support scatternet
and are difficult to connect.
> > > After that, I tried to create the second connection on slave2 side by running the same command (hcitool cc
> <master_addr>) and I obtain the following error:
> > > # Can't create connectio: input/output error.
> >
> > Run "hcidump -x" as root and show us the output.
>
> HCIDump - HCI packet analyzer ver 1.16
> device: hci0 snap_len: 1028 filter: 0xffffffff
What about trying to connect now, so we see traffic?
Regards
Marcel
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-01-14 21:18 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-14 10:21 [Bluez-users] Piconet problems jers
2005-01-14 21:18 ` Marcel Holtmann [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-07-18 18:27 Arlen Nascimento
2005-07-18 18:36 ` Marcel Holtmann
2005-01-24 11:14 jers
2005-01-24 12:25 ` Marcel Holtmann
2005-01-20 15:49 jers
2005-01-21 0:42 ` Marcel Holtmann
2005-01-20 11:33 jers
2005-01-20 12:52 ` Marcel Holtmann
2005-01-17 8:36 jers
2005-01-17 11:21 ` Marcel Holtmann
2005-01-13 13:13 jers
2005-01-13 14:39 ` Marcel Holtmann
2005-01-13 9:22 jers
2005-01-13 10:46 ` Marcel Holtmann
2005-01-11 11:19 jers
2005-01-11 10:40 jers
2005-01-11 10:52 ` Benoit Panizzon
2005-01-11 12:06 ` Marcel Holtmann
2004-12-21 13:28 jers
2004-12-21 13:56 ` Marcel Holtmann
2004-12-21 11:02 jers
2004-12-21 11:16 ` Marcel Holtmann
2004-12-21 20:21 ` blookk -
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1105737535.7525.48.camel@pegasus \
--to=marcel@holtmann.org \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox