Hi, All
I have problem using Bluetooth USB Dongle in a Xscale-based Linux machine.
The bluez official site announces that it suuport arm-based machine (including xscale).
I am wondering what I have to do solve this problem.. please help me.

First of all, I tested and succeeded in using the dongle with Redhat 9.x (2.4.20-8) with bluez 1.12 applications.
l2ping, hciconfig, ... and finally pand, where I get a ftp file trasfer speed of 500 kbp!
Now I tried to the same thing on the xsale-machine. I got a patch for 2.4.19 from the bluez site and applied it to my machine kernel.
and cross-compiled the bluez lib and utility.
Then, I plug in the dongle, I typed "hciconfig" and got a nice results
>hciconfig
 hci0 
 DN brabra.....
It is time to do the hci0 up:
>hciconfig hci0 up
IRQ occurred while service SOF: irq = 0x1
IRQ occurred while service SOF: irq = 0x1
Cannot init device: time-out (101)
I checked the /proc/bus/usb/drivers and devices. It looks ok, it has the hci_usb devices and drivers also.
So, I cheked the source and internet: it seems that the SL811 USB HOST controller driver of Arm-based linux kernel
has some problem. I even tried to patch the usb low leve driver, but still not ok ^^;;;;;
Is there any solution and hint or some suggestion for this??????