From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-devel] Re: urb timeout with bluetooth USB HCI on ARM (2.6.11-rc3) From: Marcel Holtmann To: bluez-devel@lists.sourceforge.net In-Reply-To: References: <7d01f9f00502210904ac37fae@mail.gmail.com> <1109025926.7626.2.camel@pegasus> Content-Type: text/plain Message-Id: <1109241609.5645.4.camel@notepaq> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 24 Feb 2005 11:40:09 +0100 Hi Thibaut, > Looking at the code, "isoc" is only available when CONFIG_BT_HCIUSB_SCO is > enabled, which wasn't my case. AFAICT it's used for disabling SCO protocol at > runtime in the code, but just to make absolutely sure I rebuilt the module with > SCO support enabled, tried various values for isoc=, none changed anything. > > tried with "reset=1", didn't change anything either > > FWIW, it's almost impossible to debug with CONFIG_BT_HCIUSB_DEBUG force set on, > for the machine is so slowed down that the timeouts would actually be > meaningful. Maybe this is why this config option isn't available from the config > menu ;) if both not helps, then I think that it a ARM and USB related problem. Since I don't have any of these platform, I can't help you here. Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel