From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] MyCom dongle with Broadcom ID 0a5c:2009 works now From: Marcel Holtmann To: bluez-users@lists.sourceforge.net In-Reply-To: <1109194045.3700.8.camel@archer.roalt.com> References: <1109194045.3700.8.camel@archer.roalt.com> Content-Type: text/plain Message-Id: <1109242656.5645.21.camel@notepaq> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 24 Feb 2005 11:57:36 +0100 Hi Roalt, > After some of the message in the devel-mailing list, I tried to get my > Bluetooth USB dongle, bought at a dutch computer store 'mycom', working > again. (In december it was not yet supported). This dongle is probably > the same inside as the recent iogear 311 usb dongle discussed in bluez- > devel > > With Marcel Hotmann's patch 2.6.10-mh4 applied on a Fedora Core 3's > 2.6.10-1.766_FC3 kernel sources, it works! So maybe it can be added to > the supported hardware list (Marcel?). I sent an announcement to the mailing list that I got it working. It is another special init sequence for switch HID to HCI mode. Send me "hciconfig -a" and the content of /proc/bus/usb/devices. > I'm not sure why, but the hciconfig -a command does a segmentation dump > at the end. Here is the trace when I run it from gdb: > > (gdb) run -a > Starting program: /usr/sbin/hciconfig -a > (no debugging symbols found)...(no debugging symbols found)...(no > debugging symb ols found)...(no debugging symbols found)...hci0: > Type: USB > BD Address: 00:02:72:C0:23:70 ACL MTU: 377:10 SCO MTU: 16:0 > UP RUNNING PSCAN ISCAN > RX bytes:381671 acl:11367 sco:0 events:6509 errors:0 > TX bytes:2103547 acl:10988 sco:0 commands:91 errors:0 > Features: 0xff 0xff 0x0d 0x38 0x08 0x08 0x00 0x00 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: RSWITCH HOLD SNIFF PARK > Link mode: SLAVE ACCEPT > Name: 'archer.roalt.com-0' > Class: 0x120104 > > Program received signal SIGSEGV, Segmentation fault. > 0x0000002a957d3b6c in __find_specmb () from /lib64/tls/libc.so.6 > (gdb) bt > #0 0x0000002a957d3b6c in __find_specmb () from /lib64/tls/libc.so.6 > #1 0x0000002a957ba6d2 in vfprintf () from /lib64/tls/libc.so.6 > #2 0x0000002a957c3048 in printf () from /lib64/tls/libc.so.6 > #3 0x000000552aaaee88 in ?? () from /usr/sbin/hciconfig > #4 0x000000552aaaf8a9 in ?? () from /usr/sbin/hciconfig > #5 0x000000552aaaf959 in ?? () from /usr/sbin/hciconfig > #6 0x000000552aaafbfd in main () from /usr/sbin/hciconfig > > Oh, by the way, as you can see, I run 64-bit linux on an Athlon 64 > system. Are these the latest libs and utils? It should be fixed, but I have no access to a AMD64 machine for checking these. Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users