From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] Once again: Socket CF card and Kernel 2.6 From: Marcel Holtmann To: BlueZ Mailing List In-Reply-To: <20050226031901.GL11723@adamis.de> References: <20050226031901.GL11723@adamis.de> Content-Type: text/plain Message-Id: <1109578431.17256.9.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Mon, 28 Feb 2005 09:13:51 +0100 Hi Mathias, > I'm trying to install a Socket Bluetooth Compactflash Card (Revision H) > in my Thinkpad X21. I tested it with the 2.4.29 kernel (from Debian > unstable) and it works, but I would like to use 2.6 and there it doesn't > work. > > With 2.6, the serial_cs module gets loaded as I insert the card and > dmesg shows the following: > > ----- > ttyS1: detected caps 00000700 should be 00000100 > ttyS1 at I/O 0x2f8 (irq = 11) is a 16C950/954 > ----- > > Then I run modprobe hci_uart and this is what dmesg says: > > ----- > Bluetooth: HCI UART driver ver 2.1 > Bluetooth: HCI BCSP protocol initialized > ----- > (I didn't include CONFIG_BT_HCIUART_H4 in my kernel this time) > > No problem so far, but then: hciattach ttyS1 socket > and it says "BCSP initialization timed out" and hcitool dev doesn't show > any devices. what kind of 2.6 kernel is this? Give 2.6.11-rc5 a chance. Do you see anything special with dmesg? Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users