From: Marcel Holtmann <marcel@holtmann.org>
To: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] Problems with a Broadcom USB Bluetooth Adapter
Date: Fri, 04 Mar 2005 14:34:26 +0100 [thread overview]
Message-ID: <1109943266.8058.35.camel@pegasus> (raw)
In-Reply-To: <422860FF.9080202@gmail.com>
Hi Fabio,
> I'm trying to use my bluetooth adapter with a Linux box (Debian Sarge,
> with kernel 2.6.10), but I found some problems.
>
> When I plug the adapter into the usb slot, the KDE Information Center
> can see the new hardware as BCM2033 Bluetooth (class 224, usb version
> 1.01, vendor id 0xa5c Broadcom, product id 0x2033 BCM2033 Bluetooth,
> revision 0.a0, speed 12 Mbit/s). Anyway, I also installed (through
> apt-get) KBluetoothD, but when I run it I get an error message saying:
> "No working Bluetooth adapter found. Only local services will be
> displayed". I also tried the hciconfig utility from root console, but
> the output is nothing.
>
> My kernel is the 2.6.10 version, recompiled by me (I needed to do this
> because I experienced many problems with the ACPI support). I think all
> necessary modules are presents; the command "modprobe -l | grep
> bluetooth" give me:
>
> /lib/modules/2.6.10/kernel/drivers/bluetooth/hci_uart.ko
> /lib/modules/2.6.10/kernel/drivers/bluetooth/bfusb.ko
> /lib/modules/2.6.10/kernel/drivers/bluetooth/bcm203x.ko
> /lib/modules/2.6.10/kernel/drivers/bluetooth/hci_vhci.ko
> /lib/modules/2.6.10/kernel/drivers/bluetooth/hci_usb.ko
> /lib/modules/2.6.10/kernel/net/bluetooth/bluetooth.ko
> /lib/modules/2.6.10/kernel/net/bluetooth/l2cap.ko
> /lib/modules/2.6.10/kernel/net/bluetooth/sco.ko
> /lib/modules/2.6.10/kernel/net/bluetooth/rfcomm/rfcomm.ko
> /lib/modules/2.6.10/kernel/net/bluetooth/bnep/bnep.ko
>
> The command "lsmod" give me (mixed with other things):
>
> bluetooth 43780 5 hci_usb,rfcomm,l2cap
> bcm203x 4736 0
> firmware_class 7936 1 bcm203x
> usbcore 117624 6 bcm203x,hci_usb,ndiswrapper,usbhid,ohci_hcd
> usbhid 40512 0
> ohci_hcd 32776 0
>
> I also paste here the dmesg output, starting from the time when I plug
> the adapter:
>
> hub 1-0:1.0: state 5 ports 4 chg fff0 evt 0002
> ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC
> PPS CCS
> hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
> hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
> ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103
> PRSC PPS PES CCS
> usb 1-1: new full speed USB device using ohci_hcd and address 3
> ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103
> PRSC PPS PES CCS
> usb 1-1: new device strings: Mfr=0, Product=0, SerialNumber=0
> usb 1-1: hotplug
> usb 1-1: adding 1-1:1.0 (config #1, interface 0)
> usb 1-1:1.0: hotplug
> usb 1-1: adding 1-1:1.1 (config #1, interface 1)
> usb 1-1:1.1: hotplug
> usb 1-1: adding 1-1:1.2 (config #1, interface 2)
> usb 1-1:1.2: hotplug
> Bluetooth: HCI USB driver ver 2.7
> hci_usb 1-1:1.0: usb_probe_interface
> hci_usb 1-1:1.0: usb_probe_interface - got id
> hci_usb 1-1:1.1: usb_probe_interface
> hci_usb 1-1:1.1: usb_probe_interface - got id
> hci_usb 1-1:1.2: usb_probe_interface
> hci_usb 1-1:1.2: usb_probe_interface - got id
> usbcore: registered new driver hci_usb
> bcm203x: Unknown symbol release_firmware
> bcm203x: Unknown symbol request_firmware
> Bluetooth: Broadcom Blutonium firmware driver ver 1.0
> bcm203x 1-1:1.0: usb_probe_interface
> bcm203x 1-1:1.0: usb_probe_interface - got id
> bcm203x_probe: Mini driver request failed
> bcm203x: probe of 1-1:1.0 failed with error -5
> bcm203x 1-1:1.1: usb_probe_interface
> bcm203x 1-1:1.1: usb_probe_interface - got id
> bcm203x 1-1:1.2: usb_probe_interface
> bcm203x 1-1:1.2: usb_probe_interface - got id
> usbcore: registered new driver bcm203x
install the bluez-firmware package.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
prev parent reply other threads:[~2005-03-04 13:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-04 13:22 [Bluez-users] Problems with a Broadcom USB Bluetooth Adapter Fabio Ruini
2005-03-04 13:34 ` Marcel Holtmann [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1109943266.8058.35.camel@pegasus \
--to=marcel@holtmann.org \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox