From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] Once again: Socket CF card and Kernel 2.6 From: Marcel Holtmann To: BlueZ Mailing List In-Reply-To: <42294598.6010004@adamis.de> References: <20050226031901.GL11723@adamis.de> <1109578431.17256.9.camel@pegasus> <20050228220209.GA8151@adamis.de> <1109665776.17256.122.camel@pegasus> <42294598.6010004@adamis.de> Content-Type: text/plain Message-Id: <1110021859.8058.111.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sat, 05 Mar 2005 12:24:19 +0100 Hi Mathias, > I just got it working by doing a little change in the serial driver > (8250.c). I tested it with 2.6.11 but I think it could work for any 2.6 > kernel. please provide a patch for your change. > One thing I discovered while debugging this: the hci_uart driver > seems to initialize the actual UART with only 230400 baud. Is this > really the case or are those UARTs clocked at nonstandard (higher) > frequencies so that this setting does result in a higher real baud rate? The hci_uart is only a line discipline. Every initialization and baud rate settings are done with hciattach. Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users