From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] Billionton CF card (bt950) From: Marcel Holtmann To: bluez-users@lists.sourceforge.net In-Reply-To: <20050307153436.GB13771@fuchi> References: <20050307153436.GB13771@fuchi> Content-Type: text/plain Message-Id: <1110390999.5462.28.camel@notepaq> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 09 Mar 2005 18:56:39 +0100 Hi Sebastian, > howdy folks... > > i have a CF card from Billionton here with the P/N CFBT02-B2. > cardctl ident reveals: > product info: "Compact Flash", "Bluetooth Card", "", "" > manfid: 0x0279, 0x950b > function: 2 (serial) > > /etc/pcmcia/bluetooth.conf reads: > card "Billionton Bluetooth Card" > version "Compact Flash", "Bluetooth Card" > bind "serial_cs" > > having read in the archives, bt950_cs and btuart_cs should not be used > nowadays, but serial_cs with the combination of hciattach. you > should forget about the other two, right? > > first, i tried to get it going in an Apple Powerbook (Alu, 2nd gen) > with kernel 2.6.11. but as others with similar cards (i believe the card > from Socket mentioned here > http://sourceforge.net/mailarchive/forum.php?thread_id=6735172&forum_id=1883 > to be more or less the same), it does not work. it is believed to have > something to do with the serial support in 2.6 kernels. > > then, i tried with the machine the card shall actually work with: > Zaurus SL-5500 with OpenZaurus 3.5.2, kernel 2.4.18-rmk7-pxa3-embedix. > unfortunately, the situation isn't any better. so far, serial_cs > recognizes the device: > ttyS03 at port 0xc48602f8 (irq=35) is a 16C950/954 > > but using hciattach with type "csr" always fails with > Initialization timed out. > > trying with type "ericsson" and all kinds of speeds, it fails when > issueing "hciconfig hci0 up" with the message > Can't init device hci0. Connection timet out(110) > and the kernel log is filled to message > nearly identical to these seen on the Powerbook with kernel 2.6: > h4_recv: Unknown HCI packet type 00 > h4_recv: Unknown HCI packet type 00 > h4_recv: Unknown HCI packet type 80 > h4_recv: Unknown HCI packet type f8 > h4_recv: Unknown HCI packet type 00 > h4_recv: Unknown HCI packet type 78 > > the other types have not been tried on the Zaurus, but on the Powerbook. > bt950_cs and btuart_cs have also been tried on the Zaurus, with different, > but somewhat similar error messages (replace h4_recv by btuart_cs for > instance). > > so, it does not seem to be a problem of 2.6 only. 2.4 does not work, > too. well, i fear this will be nothing more than a "metoo". at least, > others are warned about this specific card. :) maybe this card is using BCSP or a different initial baudrate. Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users