From: Tamer Higazi <tamer23@myrealbox.com>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] problems establishing connection to Cellular phone
Date: Mon, 14 Mar 2005 21:40:28 +0100 [thread overview]
Message-ID: <1110832829.9705.5.camel@tux> (raw)
In-Reply-To: <1110802408.629.3.camel@pegasus>
Dear Marcel,
Thank you for your answer. I am still not able to connect to the
phone :( Perhaps I made something wrong. I just started hciconfig and
then hcid. Nothing happened. sorry Sir, I am really a novice. If you
could explain me more detailled what I have to do, I would thank you.
About the mobile phone.... It is a Nokia 6670
With best regards
Tamer Higazi
On Mon, 2005-03-14 at 13:13 +0100, Marcel Holtmann wrote:
> Hi Tamer,
>
> > Thank you very much for the quick answer. I appreciate your help very
> > much for solving my problem (specially because I am such a newbie).
> > About the dbus, I installed it and get the bluez-pin package installed
> > successfully.
> >
> > 1st) I run up the Bluetooth-stick with the command:
> > hciconfig auth noscan nosecmgr noencrypt
>
> don't do anything like this. Simply start hcid and using "auth" means
> security mode 3. You don't want this.
>
> > and tried to connect to the mobile phone with the result (after entering
> > on the phone a PIN):
> > Can't create connection: Input/output error
> >
> > Before creating a connection I run the sniffer command:
> > hcidump -X -V
> >
> > program and received this result during the test:
> >
> > HCI sniffer - Bluetooth packet analyzer ver 1.18
> > device: hci0 snap_len: 1028 filter: 0xffffffff
> > < HCI Command: Create Connection (0x01|0x0005) plen 13
> > bdaddr 00:E0:03:65:64:94 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
> > Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> > > HCI Event: Command Status (0x0f) plen 4
> > Create Connection (0x01|0x0005) status 0x00 ncmd 1
> > > HCI Event: Link Key Request (0x17) plen 6
> > bdaddr 00:E0:03:65:64:94
> > < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
> > bdaddr 00:E0:03:65:64:94
> > > HCI Event: Command Complete (0x0e) plen 10
> > Link Key Request Negative Reply (0x01|0x000c) ncmd 1
> > status 0x00 bdaddr 00:E0:03:65:64:94
> > > HCI Event: PIN Code Request (0x16) plen 6
> > bdaddr 00:E0:03:65:64:94
> > < HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
> > bdaddr 00:E0:03:65:64:94 len 4 pin '1234'
> > > HCI Event: Command Complete (0x0e) plen 10
> > PIN Code Request Reply (0x01|0x000d) ncmd 1
> > status 0x00 bdaddr 00:E0:03:65:64:94
> > > HCI Event: Connect Complete (0x03) plen 11
> > status 0x05 handle 41 bdaddr 00:E0:03:65:64:94 type ACL encrypt 0x00
> > Error: Authentication Failure
>
> The PIN code you supply is "1234". You must enter the same on your
> phone.
>
> > 2nd) About the mobilephone itself I can give you informations i
> > requested with the tool hcitool info 00:E0:03:65:64:94:
> >
> > hcitool info 00:E0:03:65:64:94
> > Requesting information ...
> > BD Address: 00:E0:03:65:64:94
> > Device Name: Yo-Tamer
> > LMP Version: 1.1 (0x1) LMP Subversion: 0x382
> > Manufacturer: Cambridge Silicon Radio (10)
> > Features: 0xbf 0xfe 0x0f 0x00 0x00 0x00 0x00 0x00
> > <3-slot packets> <5-slot packets> <encryption> <slot
> > offset>
> > <timing accuracy> <role switch> <sniff mode> <RSSI>
> > <channel quality> <SCO link> <HV2 packets> <HV3 packets>
> > <u-law log> <A-law log> <CVSD> <paging scheme> <power
> > control>
> > <transparent SCO>
>
> What kind of phone is this?
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-03-14 20:40 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-14 2:17 [Bluez-users] problems establishing connection to Cellular phone Tamer Higazi
2005-03-14 10:21 ` Marcel Holtmann
2005-03-14 12:07 ` Tamer Higazi
2005-03-14 12:13 ` Marcel Holtmann
2005-03-14 20:40 ` Tamer Higazi [this message]
2005-03-14 20:59 ` Marcel Holtmann
2005-03-25 8:01 ` Tamer Higazi
2005-03-25 11:45 ` Marcel Holtmann
2005-03-16 0:47 ` Fredy P.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1110832829.9705.5.camel@tux \
--to=tamer23@myrealbox.com \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox