Re: [Bluez-users] bluetooth serial vs. audio connection

[Marcel Holtmann <marcel@holtmann.org>]

Hi Andreas,

> >MH: then do "sdptool search --bdaddr <bdaddr> {sp|dun}".
> 
> 
> Ok, I see... this could lead to something. I've the following output:
> 
> root@notebook:/home/andreas > sdptool search --bdaddr 00:xx sp
> Searching for sp on 00:xx ...
> Service Name: Serial Port
> Service RecHandle: 0x10003
> Service Class ID List:
>   "Serial Port" (0x1101)
> Protocol Descriptor List:
>   "L2CAP" (0x0100)
>   "RFCOMM" (0x0003)
>     Channel: 3
> 
> root@notebook:/home/andreas > sdptool search --bdaddr 00:xx dun
> Searching for dun on 00:xx ...
> Service Name: Dial-up networking
> Service RecHandle: 0x10002
> Service Class ID List:
>   "Dialup Networking" (0x00001103)
> Protocol Descriptor List:
>   "L2CAP" (0x00000100)
>   "RFCOMM" (0x00000003)
>     Channel: 4
> Segmentation fault
> root@notebook:/home/andreas >
> 
> (note the last 'Segmentation fault', this might be the reason, the 
> browse command does not work as expected)

what kind of phone is this?

> Thanks so far, but how to proceed? (I've still the same problem, 
> connecting with bluez 'only' gives an 'audio' connection, not the 
> expected 'serial' as I got from Windows).

What happens if you connect to channel 3 or channel 4?

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users