On Tue, 2005-04-26 at 12:37 +0100, Peter Robinson wrote: > > Hi, > > if I do > > > > > modprobe snd_bt_sco > > > esdctl stop > > > hciconfig hci0 voice 0x0060 > > > btsco > > > aplay -B 1000000 -D plughw:Headset > > > > I can't hear anything else than a bip in my headset, > > that is properly paired (I checked with 'hcitool con') > > 'dmesg' gives me what follows: > Hi Peter, > When you type in btsco addr do you then hit the connect button on your > headset this was the problem I was having with the motorola headsets > I've tested (HS-810 and HS-850). do you mean that I shouldn't press connect button? > I wasn't using aplay but rather just using gnomemeeting and the > headset just came up in the list of devices. I also tried to cat a .wav file straight to /dev/dsp1 (supposed to be the headset device) and I didn't hear anything, but maybe this is not the right way to get something, isn't it? > Regards > Peter many thanks Cristiano > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real users. > Discover which products truly live up to the hype. Start reading now. > http://ads.osdn.com/?ad_ide95&alloc_id396&op=click > _______________________________________________ > Bluez-devel mailing list > Bluez-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bluez-devel > -- Cristiano De Michele, Ph.D. E-mail: cristiano.demichele@phys.uniroma1.it Department of Physics Tel. : +390649913435 University of Rome "La Sapienza" Fax : +39064463158 Piazzale Aldo Moro 2 I-00185 Roma - Italy ------ "Shoot for the moon. Even if you miss, you'll land among the stars."