From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: RE: [Bluez-users] Bluetooth PCMCIA progress... From: Marcel Holtmann To: bluez-users@lists.sourceforge.net In-Reply-To: References: Content-Type: text/plain Message-Id: <1116602022.8819.9.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Fri, 20 May 2005 17:13:42 +0200 Hi John, > I wish I could migrate to a 2.6 kernel but the hardware vendor for > this platform only ships/supports their patched 2.4.27.vrs1 kernel. It > looks like you had drivers for this card (and a few others) posted on > holtmann.org but removed them?? Are these possibly still available to > someone like myself? I came onto this project a few weeks ago and am > stuck with the H/W platform but still do need to demo Bluetooth > dial-up networking via the PCMCIA slot of this platform in the next > couple of weeks. Do you have access to an ARM/XScale PXA255 based > system with a 16-bit PCMCIA slot? I could FedEx overnight a card to > you (and yes, you could then keep it ) for driver testing!? This card > seems to work fine in an x86-based Linux system. Any ideas here? the driver you are talking about is bt3c_cs and it is included in the mainline kernel and also my -mh patches. However this driver is only for the version 2.0 of the 3Com cards and I have one of these for testing at home. So you say that the card with version 3.0 is working on your x86 system, but not on your ARM. Unfortunately I don't have an ARM for testing, but if it is working on x86 then it must be the serial driver for the ARM that causes the problem here. We only put a line discipline onto the UART and let the serial subsystem handle everything else. Feel free to send me a version 3.0 card anyway. I am happy about any Bluetooth adapter I have at home for testing, because it is impossible for me to buy them all. Are you sure that a 2.6 kernel doesn't already support the platform without any additional patches. From my experiences people are bound to a 2.4 kernel without any reasons. Only because some vendors say so. Lots of ARM patches were merged into the 2.6 kernel series. So you might wanna give it a try. You might wanna exchange the Bluetooth PCMCIA card. The newer cards from Socket should work fine with a 2.4 kernel and they contain the same chipset as the 3Com. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users