From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] trouble connecting to device From: Marcel Holtmann To: bluez-users@lists.sourceforge.net In-Reply-To: References: Content-Type: text/plain Message-Id: <1121607747.22662.19.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sun, 17 Jul 2005 15:42:27 +0200 On Fri, 2005-07-15 at 18:30 -0500, Ian Bobbitt wrote: > I'm using a USB dongle with a CSR chip to connect to a device from > blueradios.com. The manual for this device says the PIN code is > "default", and is required. > > I have tried running the following commands: > -----------------------------8<------------------------ > papasmurf ~ # hcitool inq > Inquiring ... > 00:A0:96:0E:4C:8A clock offset: 0x1108 class: 0x000000 > papasmurf ~ # hcitool cc 00:A0:96:0E:4C:8A > > papasmurf ~ # hcitool con > Connections: > < ACL 00:A0:96:0E:4C:8A handle 42 state 1 lm MASTER > papasmurf ~ # hcitool auth 00:A0:96:0E:4C:8A > HCI authentication request failed: Input/output error > papasmurf ~ # hcitool dc 00:A0:96:0E:4C:8A > -----------------------------8<------------------------ > > > The output of hcidump is: > -----------------------------8<------------------------ > papasmurf ~ # hcidump -XV --psm=3 > > HCI sniffer - Bluetooth packet analyzer ver 1.21 > device: hci0 snap_len: 1028 filter: 0xffffffff > < HCI Command: Inquiry (0x01|0x0001) plen 5 > lap 0x9e8b33 len 8 num 0 > > HCI Event: Command Status (0x0f) plen 4 > Inquiry (0x01|0x0001) status 0x00 ncmd 1 > > HCI Event: Inquiry Result (0x02) plen 15 > bdaddr 00:A0:96:0E:4C:8A mode 1 clkoffset 0x1108 class 0x000000 > > HCI Event: Inquiry Complete (0x01) plen 1 > status 0x00 > < HCI Command: Create Connection (0x01|0x0005) plen 13 > bdaddr 00:A0:96:0E:4C:8A ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > > HCI Event: Command Status (0x0f) plen 4 > Create Connection (0x01|0x0005) status 0x00 ncmd 1 > > HCI Event: Connect Complete (0x03) plen 11 > status 0x00 handle 42 bdaddr 00:A0:96:0E:4C:8A type ACL encrypt 0x00 > < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 > handle 42 policy 0x0f > Link policy: RSWITCH HOLD SNIFF PARK > > HCI Event: Command Complete (0x0e) plen 6 > Write Link Policy Settings (0x02|0x000d) ncmd 1 > status 0x00 handle 42 > > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 > bdaddr 00:A0:96:0E:4C:8A mode 1 > > HCI Event: Max Slots Change (0x1b) plen 3 > handle 42 slots 5 > < HCI Command: Authentication Requested (0x01|0x0011) plen 2 > handle 42 > > HCI Event: Command Status (0x0f) plen 4 > Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 > > HCI Event: Link Key Request (0x17) plen 6 > bdaddr 00:A0:96:0E:4C:8A > < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 > bdaddr 00:A0:96:0E:4C:8A key 888A933AE77F43813AEFAB8B8FCBA9BA > > HCI Event: Command Complete (0x0e) plen 10 > Link Key Request Reply (0x01|0x000b) ncmd 1 > status 0x00 bdaddr 00:A0:96:0E:4C:8A > > HCI Event: Auth Complete (0x06) plen 3 > status 0x05 handle 42 > Error: Authentication Failure > < HCI Command: Disconnect (0x01|0x0006) plen 3 > handle 42 reason 0x13 > Reason: Remote User Terminated Connection > > HCI Event: Command Status (0x0f) plen 4 > Disconnect (0x01|0x0006) status 0x00 ncmd 1 > > HCI Event: Disconn Complete (0x05) plen 4 > status 0x00 handle 42 reason 0x16 > Reason: Connection Terminated by Local Host > < HCI Command: Create Connection (0x01|0x0005) plen 13 > bdaddr 00:A0:96:0E:4C:8A ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > > HCI Event: Command Status (0x0f) plen 4 > Create Connection (0x01|0x0005) status 0x00 ncmd 1 > > HCI Event: Connect Complete (0x03) plen 11 > status 0x00 handle 42 bdaddr 00:A0:96:0E:4C:8A type ACL encrypt 0x00 > < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 > handle 42 policy 0x0f > Link policy: RSWITCH HOLD SNIFF PARK > > HCI Event: Command Complete (0x0e) plen 6 > Write Link Policy Settings (0x02|0x000d) ncmd 1 > status 0x00 handle 42 > > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 > bdaddr 00:A0:96:0E:4C:8A mode 1 > > HCI Event: Max Slots Change (0x1b) plen 3 > handle 42 slots 5 > < HCI Command: Remote Name Request (0x01|0x0019) plen 10 > bdaddr 00:A0:96:0E:4C:8A mode 2 clkoffset 0x0000 > > HCI Event: Command Status (0x0f) plen 4 > Remote Name Request (0x01|0x0019) status 0x00 ncmd 1 > > HCI Event: Remote Name Req Complete (0x07) plen 255 > status 0x00 bdaddr 00:A0:96:0E:4C:8A name 'Goofy Giggles' > < HCI Command: Read Remote Version Information (0x01|0x001d) plen 2 > handle 42 > > HCI Event: Command Status (0x0f) plen 4 > Read Remote Version Information (0x01|0x001d) status 0x00 ncmd 1 > > HCI Event: Read Remote Ver Info Complete (0x0c) plen 8 > status 0x00 handle 42 > LMP Version: 1.2 (0x2) LMP Subversion: 0x5df > Manufacturer: Cambridge Silicon Radio (10) > < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > handle 42 > > HCI Event: Command Status (0x0f) plen 4 > Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > > HCI Event: Read Remote Supported Features (0x0b) plen 11 > status 0x00 handle 42 > Features: 0xff 0xff 0x8f 0x78 0x18 0x18 0x00 0x80 > < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 > handle 42 page 0 > > HCI Event: Command Status (0x0f) plen 4 > Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > > HCI Event: Read Remote Extended Features (0x23) plen 13 > status 0x00 handle 42 page 0 max 0 > Features: 0xff 0xff 0x8f 0x78 0x18 0x18 0x00 0x80 > < HCI Command: Disconnect (0x01|0x0006) plen 3 > handle 42 reason 0x13 > Reason: Remote User Terminated Connection > > HCI Event: Command Status (0x0f) plen 4 > Disconnect (0x01|0x0006) status 0x00 ncmd 1 > > HCI Event: Disconn Complete (0x05) plen 4 > status 0x00 handle 42 reason 0x16 > Reason: Connection Terminated by Local Host > -----------------------------8<------------------------ > > > -----------------------------8<------------------------ > papasmurf ~ # hcitool info 00:A0:96:0E:4C:8A > Requesting information ... > BD Address: 00:A0:96:0E:4C:8A > Device Name: Goofy Giggles > LMP Version: 1.2 (0x2) LMP Subversion: 0x5df > Manufacturer: Cambridge Silicon Radio (10) > Features: 0xff 0xff 0x8f 0x78 0x18 0x18 0x00 0x80 > <3-slot packets> <5-slot packets> offset> > > packets> > scheme> > > > > > -----------------------------8<------------------------ > > > hcid.conf is: > -----------------------------8<------------------------ > options { > autoinit yes; > security user; > pairing multi; > pin_helper /etc/bluetooth/pin-helper > } > device { > name "BlueZ (%d)"; > class 0x3e0100; > iscan enable; pscan enable; > lm accept; > lp rswitch,hold,sniff,park; > } > -----------------------------8<------------------------ > > pin-helper is: > -----------------------------8<------------------------ > #!/bin/sh > echo -n "PIN:" > cat /etc/bluetooth/pin > -----------------------------8<------------------------ > > and pin is: > -----------------------------8<------------------------ > default > -----------------------------8<------------------------ > > > What am I doing wrong with connecting to this device? Will I eventually > need to use rfcomm when I can authenticate with the device? don't use "hcitool cc" for creating connections. Use rfcomm, rctest or l2test if you wanna test something. You also maybe need to set your remote device into pairing mode, because were already paired. Regards Marcel ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users