From: david <gangchen@mobilesoft.com.cn>
To: bluez-devel@lists.sourceforge.net
Subject: [Bluez-devel] file transfer problem
Date: Mon, 12 Sep 2005 09:41:36 +0800 [thread overview]
Message-ID: <1126489296.2376.22.camel@localhost.localdomain> (raw)
hi,
I use bluez-utils-2.20 and run "hcidump -X -V" to see what happens. Then
I try to use Sony Ericssion phone to transfer a file to my bluetooth
device, but it fails. I get the following mssage,
/********* below is the msg **************/
HCI sniffer - Bluetooth packet analyzer ver 1.25
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:0E:07:62:86:6C class 0x520204 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:0E:07:62:86:6C role 0x01
Role: Slave
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 40 bdaddr 00:0E:07:62:86:6C type ACL encrypt 0x00
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 40 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
bdaddr 00:0E:07:62:86:6C mode 1
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 40
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 40 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
status 0x00 handle 40 ptype 0x0018
Packet type: DM1 DH1
> ACL data: handle 40 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 40 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 40 packets 1
> ACL data: handle 40 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 251
< ACL data: handle 40 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
< ACL data: handle 40 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 40 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 40 packets 1
> ACL data: handle 40 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 40 flags 0x02 dlen 17
> ACL data: handle 40 flags 0x01 dlen 17
L2CAP(d): cid 0x0040 len 30 [psm 1]
SDP SSA Req: tid 0x0 len 0x19
pat uuid-16 0x1105 (OBEXObjPush)
max 65535
aid(s) 0x0001 (SrvClassIDList) 0x0004 (ProtocolDescList)
0x0009 (BTProfileDescList) 0x0100 (SrvName) 0x0303 (SuppFormatsList)
cont 00
< ACL data: handle 40 flags 0x02 dlen 184
L2CAP(d): cid 0x0040 len 180 [psm 1]
SDP SSA Rsp: tid 0x0 len 0xaf
count 172
record #0
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1105 (OBEXObjPush) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > <
uuid-16 0x0008 (OBEX) > >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x1105 (OBEXObjPush) uint 0x100 > >
aid 0x0100 (SrvName)
str "OBEX Object Push"
aid 0x0303 (SuppFormatsList)
< uint 0xff >
record #1
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1105 (OBEXObjPush) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > <
uuid-16 0x0008 (OBEX) > >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x1105 (OBEXObjPush) uint 0x100 > >
aid 0x0100 (SrvName)
str "OBEX Object Push"
aid 0x0303 (SuppFormatsList)
< uint 0xff >
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 40 packets 1
> ACL data: handle 40 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 40 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 40 packets 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 40 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:0E:07:62:86:6C class 0x520204 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:0E:07:62:86:6C role 0x01
Role: Slave
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 41 bdaddr 00:0E:07:62:86:6C type ACL encrypt 0x00
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 41 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
bdaddr 00:0E:07:62:86:6C mode 1
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 41
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 41 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0041
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
status 0x00 handle 41 ptype 0x0018
Packet type: DM1 DH1
< ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 251
< ACL data: handle 41 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
Success
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 41 flags 0x02 dlen 17
> ACL data: handle 41 flags 0x01 dlen 11
L2CAP(d): cid 0x0040 len 24 [psm 1]
SDP SSA Req: tid 0x0 len 0x13
pat uuid-16 0x1105 (OBEXObjPush)
max 65535
aid(s) 0x0001 (SrvClassIDList) 0x0004 (ProtocolDescList)
0x0303 (SuppFormatsList)
cont 00
< ACL data: handle 41 flags 0x02 dlen 116
L2CAP(d): cid 0x0041 len 112 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x6b
count 104
record #0
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1105 (OBEXObjPush) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > <
uuid-16 0x0008 (OBEX) > >
aid 0x0303 (SuppFormatsList)
< uint 0xff>
record #1
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1105 (OBEXObjPush) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > <
uuid-16 0x0008 (OBEX) > >
aid 0x0303 (SuppFormatsList)
< uint 0xff>
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0041
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0042
< ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0042 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 251
< ACL data: handle 41 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0042 flags 0x00 result 0 clen 0
Success
< ACL data: handle 41 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0042 flags 0x00 clen 4
MTU 1024
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 17
> ACL data: handle 41 flags 0x01 dlen 1
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
Success
MTU 251
> ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
< ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0042 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 17
> ACL data: handle 41 flags 0x01 dlen 2
L2CAP(d): cid 0x0040 len 15 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 246 max_retrans 0 credits 7
< ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0042 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 41 flags 0x02 dlen 8
L2CAP(d): cid 0x0042 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0042
< ACL data: handle 41 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0042
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 41 packets 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 41 reason 0x13
Reason: Remote User Terminated Connection
/*************************************/
>From: Marcel Holtmann <marcel@ho...>
> Re: file transfer problem
>2005-09-08 16:14
> Hi David,
> I meet a problem while doing file transfer using bluez-2.9.
> Some phone cannot find my services I register. I browse my sevice and
> get the following message:
>...
> So I compare my phone's service with others'.
> I find the only difference between them is that my Service RecHandle is different from others.
> My Service Rechandle is very big such as ox804fa00. Others are 0x10000, 0x10001...,and so on.
> Is there anything to do with Service RecHandle why other bluetooth devices cannot find my bluetooth services?
> I am expecting for you reply. Thanks very much.
did you tried to use bluez-utils-2.20? Run "hcidump -X -V" to see what
the phone is looking for.
Regards
Marcel
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next reply other threads:[~2005-09-12 1:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-12 1:41 david [this message]
2005-09-12 22:20 ` [Bluez-devel] file transfer problem Marcel Holtmann
-- strict thread matches above, loose matches on Subject: below --
2005-09-08 7:40 david
2005-09-08 23:14 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1126489296.2376.22.camel@localhost.localdomain \
--to=gangchen@mobilesoft.com.cn \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).