Re: [Bluez-devel] problems with AnyCom CF-300 on ARM920 Integrator/AP

[Marcel Holtmann <marcel@holtmann.org>]

Hi Itzhak,

> I'm having a very hard time trying to make bluetooth work on the ARM
> Integrator/AP platform.
> 
> Initially, I had a problem with pccard that was not recognized by pcmcia
> yenta_socket. Then, Russell King (ARM Linux Maintainer) provided my a
> patch that solved this problem.
> 
> Then, now pccard bus works properly. PCMCIA system recognizes my card:
> Socket 0:
>   product info: "BTCFCARD", "LSE139"
>   manfid: 0x0264, 0x000b
>   function: 6 (network)
> 
> However, bluecard_cs fails to allocate IO regions.
> 
> Has anybody same similar problems on ARM? Is there anyone working with
> AnyCom CF-300 card?
> 
> I'd appreciate any hint/help that could help me solve this problem.

I saw you discussing this on LKML and this is the right place for
dealing with it, because I don't have ARM experince. Once you got it
working, please report it back here and if there is a patch then send it
to me to merge it mainline.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel