[Bluez-devel] hcid.conf : security auto - pairing

[Bluez-devel] hcid.conf : security auto - pairing

[Charles Majola]

Hi,

Issint the "auto" option suppose to work for outgoing connections also?

when I do .... 

bash$ rfcomm connect 0 xx:xx:xx:xx:xx:xx

my cellphone askes for a pin, I type it in and then the cumputer it 
brings up bluepin asking for a pin. issint is suppose to the the default 
one in /etc/bluetooth/pin ?

---
chmj


-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. 
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP.  Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

[Bluez-devel] pairing problem

[Charles Majola]

Hi,

I have a strange problem. For some reason when I boot my pc, I can't 
make outgoing connections from my computer to my cellphone until I 
restart bluez services(although already started at boot time, incomming 
connections work fine). If I restart my computer, I have to restart 
bluez services again so that outgoing connections work. I can't see 
anything might cause this, it used to work fine with bluez-{utils,libs}< 
2.20. Any ideas ?

---
chmj


-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. 
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP.  Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] pairing problem

[Marcel Holtmann]

Hi Charles,

> I have a strange problem. For some reason when I boot my pc, I can't 
> make outgoing connections from my computer to my cellphone until I 
> restart bluez services(although already started at boot time, incomming 
> connections work fine). If I restart my computer, I have to restart 
> bluez services again so that outgoing connections work. I can't see 
> anything might cause this, it used to work fine with bluez-{utils,libs}< 
> 2.20. Any ideas ?

install the latest bluez-utils-2.21 and try again. Run "hcidump -X -V"
to see what is going on.

Regards

Marcel




-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. 
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP.  Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] hcid.conf : security auto - pairing

[Marcel Holtmann]

Hi Charles,

> Issint the "auto" option suppose to work for outgoing connections also?
> 
> when I do .... 
> 
> bash$ rfcomm connect 0 xx:xx:xx:xx:xx:xx
> 
> my cellphone askes for a pin, I type it in and then the cumputer it 
> brings up bluepin asking for a pin. issint is suppose to the the default 
> one in /etc/bluetooth/pin ?

the /etc/bluetooth/pin is only used for incoming connection. For
outgoing connections the /var/lib/bluetooth/<bdaddr>/pincodes can be
used. Look at the source code for details, because I never made this
feature public.

Regards

Marcel




-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. 
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP.  Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] pairing problem

[Charles Majola]

Marcel Holtmann wrote:

>Hi Charles,
>
>  
>
>>I have a strange problem. For some reason when I boot my pc, I can't 
>>make outgoing connections from my computer to my cellphone until I 
>>restart bluez services(although already started at boot time, incomming 
>>connections work fine). If I restart my computer, I have to restart 
>>bluez services again so that outgoing connections work. I can't see 
>>anything might cause this, it used to work fine with bluez-{utils,libs}< 
>>2.20. Any ideas ?
>>    
>>
>
>install the latest bluez-utils-2.21 and try again. Run "hcidump -X -V"
>to see what is going on.
>  
>
Here is the outputdevice: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:0E:6D:45:2E:4D ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
 > HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
 > HCI Event: Connect Complete (0x03) plen 11
    status 0x00 handle 41 bdaddr 00:0E:6D:45:2E:4D type ACL encrypt 0x00
< ACL data: handle 41 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 3 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
    handle 41 policy 0x0f
    Link policy: RSWITCH HOLD SNIFF PARK
 > HCI Event: Command Complete (0x0e) plen 6
    Write Link Policy Settings (0x02|0x000d) ncmd 1
    status 0x00 handle 41
 > HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
 > HCI Event: Max Slots Change (0x1b) plen 3
    handle 41 slots 5
 > ACL data: handle 41 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0048 scid 0x0040 result 1 status 2
      Connection pending - Authorization pending
 > HCI Event: QoS Setup Complete (0x0d) plen 21
    status 0x00 handle 41 flags 0
    Service type: 1
    Token rate: 0
    Peak bandwith: 0
    Latency: 5000
    Delay variation: -1
 > ACL data: handle 41 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0048 scid 0x0040 result 0 status 0
      Connection successful
< ACL data: handle 41 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x0048 flags 0x00 clen 4
      MTU 1024
 > ACL data: handle 41 flags 0x02 dlen 12
    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
< ACL data: handle 41 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x0048 flags 0x00 result 0 clen 0
      Success
 > HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
 > HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
 > ACL data: handle 41 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
      Success
      MTU 672
< ACL data: handle 41 flags 0x02 dlen 8
    L2CAP(d): cid 0x0048 len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
 > HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
 > ACL data: handle 41 flags 0x02 dlen 8
    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 41 flags 0x02 dlen 18
    L2CAP(d): cid 0x0048 len 14 [psm 3]
      RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
      dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
      frame_size 667 max_retrans 0 credits 7
 > HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
 > ACL data: handle 41 flags 0x02 dlen 18
    L2CAP(d): cid 0x0040 len 14 [psm 3]
      RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
      dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
      frame_size 667 max_retrans 0 credits 3
< ACL data: handle 41 flags 0x02 dlen 8
    L2CAP(d): cid 0x0048 len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
 > HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
 > HCI Event: PIN Code Request (0x16) plen 6
    bdaddr 00:0E:6D:45:2E:4D
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
    bdaddr 00:0E:6D:45:2E:4D
 > HCI Event: Command Complete (0x0e) plen 10
    PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
    status 0x00 bdaddr 00:0E:6D:45:2E:4D
 > ACL data: handle 41 flags 0x02 dlen 8
    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
< ACL data: handle 41 flags 0x02 dlen 8
    L2CAP(d): cid 0x0048 len 4 [psm 3]
      RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 41 flags 0x02 dlen 12
    L2CAP(s): Disconn req: dcid 0x0048 scid 0x0040
 > HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
 > HCI Event: Number of Completed Packets (0x13) plen 5
    handle 41 packets 1
 > ACL data: handle 41 flags 0x02 dlen 8
    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
 > ACL data: handle 41 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0048 scid 0x0040
< HCI Command: Disconnect (0x01|0x0006) plen 3
    handle 41 reason 0x13
    Reason: Remote User Terminated Connection
 > HCI Event: Command Status (0x0f) plen 4
    Disconnect (0x01|0x0006) status 0x00 ncmd 1
 > HCI Event: Disconn Complete (0x05) plen 4
    status 0x00 handle 41 reason 0x16
    Reason: Connection Terminated by Local Host


 

>Regards
>
>Marcel
>
>
>
>
>-------------------------------------------------------
>SF.Net email is sponsored by:
>Tame your development challenges with Apache's Geronimo App Server. 
>Download it for free - -and be entered to win a 42" plasma tv or your very
>own Sony(tm)PSP.  Click here to play: http://sourceforge.net/geronimo.php
>_______________________________________________
>Bluez-devel mailing list
>Bluez-devel@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/bluez-devel
>
>  
>



-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] pairing problem

[Marcel Holtmann]

Hi Charles,

> >>I have a strange problem. For some reason when I boot my pc, I can't 
> >>make outgoing connections from my computer to my cellphone until I 
> >>restart bluez services(although already started at boot time, incomming 
> >>connections work fine). If I restart my computer, I have to restart 
> >>bluez services again so that outgoing connections work. I can't see 
> >>anything might cause this, it used to work fine with bluez-{utils,libs}< 
> >>2.20. Any ideas ?
> >>    
> >>
> >
> >install the latest bluez-utils-2.21 and try again. Run "hcidump -X -V"
> >to see what is going on.

looks like your PIN helper is not working. Check the syslog for messages
from hcid.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] pairing problem

[Charles Majola]

Marcel Holtmann wrote:

>Hi Charles,
>
>  
>
>>>>I have a strange problem. For some reason when I boot my pc, I can't 
>>>>make outgoing connections from my computer to my cellphone until I 
>>>>restart bluez services(although already started at boot time, incomming 
>>>>connections work fine). If I restart my computer, I have to restart 
>>>>bluez services again so that outgoing connections work. I can't see 
>>>>anything might cause this, it used to work fine with bluez-{utils,libs}< 
>>>>2.20. Any ideas ?
>>>>   
>>>>
>>>>        
>>>>
>>>install the latest bluez-utils-2.21 and try again. Run "hcidump -X -V"
>>>to see what is going on.
>>>      
>>>
>
>looks like your PIN helper is not working. Check the syslog for messages
>from hcid.
>  
>

Sep 30 10:03:09 localhost hcid[6848]: pin_code_request 
(sba=00:0E:A1:04:E6:C8, dba=00:0E:6D:45:2E:4D)
Sep 30 10:03:09 localhost hcid[7340]: PIN helper exited abnormally with 
code 256

It works fine once I restart hcid. Thats why I have no idea whats 
causing it.

Regards
Charles

>Regards
>
>Marcel
>
>
>
>
>-------------------------------------------------------
>This SF.Net email is sponsored by:
>Power Architecture Resource Center: Free content, downloads, discussions,
>and more. http://solutions.newsforge.com/ibmarch.tmpl
>_______________________________________________
>Bluez-devel mailing list
>Bluez-devel@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/bluez-devel
>
>  
>



-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

[Bluez-devel] pairing problem

[shantibhushan sale]

[-- Attachment #1.1: Type: text/plain, Size: 1703 bytes --]

I m not able to pair to my soni ericcson or any other phone from Blutooth
Dongle which is connected  to the computer.
Please,help me in this regard.I have to connect from computer to phone.
I am entering passcode 1234.it doestn accept the connection.

I have following configuration for my etc/bluetooth/hcid.conf

#
# HCI daemon configuration file.
#

# HCId options
options {
    # Automatically initialize new devices
    autoinit yes;

    # Security Manager mode
    #   none - Security manager disabled
    #   auto - Use local PIN for incoming connections
    #   user - Always ask user for a PIN
    #
    security auto;
     #security none;

    # Pairing mode
    #   none  - Pairing disabled
    #   multi - Allow pairing with already paired devices
    #   once  - Pair once and deny successive attempts
    pairing multi;
#    pairing none;

    # Default PIN code for incoming connections
    passkey "0000";
}

# Default settings for HCI devices
device {
    # Local device name
    #   %d - device id
    #   %h - host name
    name "BlueZ (%d)";

    # Local device class
    class 0x3e0100;

    # Default packet type
    #pkt_type DH1,DM1,HV1;

    # Inquiry and Page scan
    iscan enable; pscan enable;

    # Default link mode
    #   none   - no specific policy
    #   accept - always accept incoming connections
    #   master - become master on incoming connections,
    #            deny role switch on outgoing connections
    lm accept;

    # Default link policy
    #   none    - no specific policy
    #   rswitch - allow role switch
    #   hold    - allow hold mode
    #   sniff   - allow sniff mode
    #   park    - allow park mode
    lp rswitch,hold,sniff,park;
}

[-- Attachment #1.2: Type: text/html, Size: 2873 bytes --]

[-- Attachment #2: Type: text/plain, Size: 373 bytes --]

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

[Bluez-devel] pairing problem

[shantibhushan sale]

[-- Attachment #1.1: Type: text/plain, Size: 234 bytes --]

I am not able to connect to my phone using rfcomm connection.When i go for
connection,it askes for pass key that i enter same as in /etc/bluetooth/pin
.Then also it wont get succeded.
       Help me in this problem.Thnks in advnace,.

[-- Attachment #1.2: Type: text/html, Size: 272 bytes --]

[-- Attachment #2: Type: text/plain, Size: 373 bytes --]

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Re: [Bluez-devel] pairing problem

[Marcel Holtmann]

Hi,

> I am not able to connect to my phone using rfcomm connection.When i go
> for connection,it askes for pass key that i enter same as
> in /etc/bluetooth/pin .Then also it wont get succeded.

the /etc/bluetooth/pin file is not longer used in BlueZ 3.x and this
problem has been discussed a lot. Check the mailing list archive for
possible solutions.

Regards

Marcel



-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel